MAGSON-MM
20Pages

{{requestButtons}}

Catalog excerpts

MAGSON-MM - 1

SONDERMANN PUMPS • FILTER TECHNOLOGY MORE THAN 50 YEARS SONDERMANN Competence in pump and filter technologies

Open the catalog to page 1
MAGSON-MM - 2

MAGSON MM – magnetically coupled centrifugal pumps Overview of new metallic MAGSON products MM Type 1 Suction Port Discharge Port Characteristic curves of MM pumps m.WC Delivery head Volume flow MM – Type 4 MM – Type 3 MM – Type 2 MM – Type 1 Type 5 For technical data of all MM pump types see page

Open the catalog to page 2
MAGSON-MM - 3

Always on the safe side! If plastics cannot be used – metall MAGSON MM pumps are the perfect solution for these cases. Conventionally operating centrifugal pumps with wearresistant shaft seals reliably requires a high degree of technical and financial expenditure, particularly in the case of highly aggressive media. The availability of the plant is also reduced by the regularly required maintenance cycles. The advantage of sealless, magnetically coupled centrifugal pumps: hermetically tight and maintenance-free The MAGSON MM is available alongside the standardized stainless steel 1.4401 in...

Open the catalog to page 3
MAGSON-MM - 4

MAGSON MM - magnetically coupled centrifugal pumps

Open the catalog to page 4
MAGSON-MM - 5

All advantages of MAGSON pumps at a glance Maximum safety: Maximum efficiency: •• no shaft seal for hermetically sealed •• Spiral casing for best efficiency and ultra-low energy consumption •• ATEX execution available on request •• AC motors with thermal protection to avoid damage in case of motor overload •• Temperatures up to 190 °C in standard design and up to 300 °C possible on request •• Motor may be exchanged while the system is hermetically sealed •• competent advice to find the perfectly dimensioned design of your MAGSON pump •• motors also available with frequency converter for the...

Open the catalog to page 5
MAGSON-MM - 6

MAGSON MM – magnetically coupled centrifugal pumps MM type 1 •• Without shaft seal •• Robust and casted casing •• CARTRIDGE UNIT for fast and easy maintenance •• Temperature up to 190 °C (higher temperatures are possible) •• Close coupled, single stage, back-pullout-design •• Universal DIN / ANSI connection •• Suction port DN 25, discharge port DN 20 Characteristic curve Delivery head [m.WC] Volume flow

Open the catalog to page 6
MAGSON-MM - 7

Technical data MM type 1 Size Stainless Steel 1.4401 (AISI 316) Max. volume flow in [l/min] at 50 Hz Suction port Discharge port Protection class Max. flow velocity in [m/s] IP 55 suction side = 1 / discharge side = 3 Max. system pressure in [bar] Max. temperature in [°C] * approx. at max. volume flow (higher density possible when flow rate is reduced) ** depends on motor supplier *** other voltages on request Materials You will find all materials available and their characteristics on page 4. Accessories such as RPR control and frequency converters see pages 16. Motor dimensions may differ...

Open the catalog to page 7
MAGSON-MM - 8

MAGSON MM – magnetically coupled centrifugal pumps MM type 2 •• Without shaft seal •• Robust and casted casing •• CARTRIDGE UNIT for fast and easy maintenance •• Temperature up to 190 °C (higher temperatures are possible) •• Close coupled, single stage, back-pullout-design •• Universal DIN / ANSI connection •• Suction port DN 40, discharge port DN 25 Volume flow

Open the catalog to page 8
MAGSON-MM - 9

Technical data MM type 2 Size Stainless Steel 1.4401 (AISI 316) Max. volume flow in [l/min] at 50 Hz Max. density in [g/cm³] at 50 Hz * Suction port Discharge port Voltage in [V] *** Protection class Max. flow velocity in [m/s] IP 55 suction side = 1 / discharge side = 3 Max. system pressure in [bar] Max. temperature in [°C] * approx. at max. volume flow (higher density possible when flow rate is reduced) ** depends on motor supplier *** other voltages on request Materials You will find all materials available and their characteristics on page 4. Accessories such as RPR control and...

Open the catalog to page 9
MAGSON-MM - 10

MAGSON MM – magnetically coupled centrifugal pumps MM type 3 •• Without shaft seal •• Robust and casted casing •• CARTRIDGE UNIT for fast and easy maintenance •• Temperature up to 190 °C (higher temperatures are possible) •• Close coupled, single stage, back-pullout-design •• Universal DIN / ANSI connection •• Suction port DN 50, discharge port DN 32 Characteristic curve Volume flow Determined with water of

Open the catalog to page 10
MAGSON-MM - 11

Technical data MM type 3 Size Stainless Steel 1.4401 (AISI 316) Max. volume flow in [l/min] at 50 Hz Current rating (400 V, 50 Hz) in [A] ** Rated speed in [rpm] at 50 Hz Suction port Discharge port Voltage in [V] *** Protection class Max. flow velocity in [m/s] IP 55 suction side = 1 / discharge side = 3 Max. system pressure in [bar] Max. temperature in [°C] * approx. at max. volume flow (higher density possible when flow rate is reduced) ** depends on motor supplier *** other voltages on request Materials You will find all materials available and their characteristics on page 4....

Open the catalog to page 11
MAGSON-MM - 12

MAGSON MM – magnetically coupled centrifugal pumps MM type 4 •• Without shaft seal •• Robust and casted casing •• CARTRIDGE UNIT for fast and easy maintenance •• Temperature up to 190 °C (higher temperatures are possible) •• Close coupled, single stage, back-pullout-design •• Universal DIN / ANSI connection •• Suction port DN 50, discharge port DN 40 Volume flow

Open the catalog to page 12
MAGSON-MM - 13

Technical data MM type 4 Size Stainless Steel 1.4401 (AISI 316) Motor capacity in [kW] Current rating (400 V, 50 Hz) in [A] ** Max. volume flow in [l/min] at 50 Hz Max. density in [g/cm³] at 50 Hz * Suction port Discharge port Voltage in [V] *** Protection class Max. flow velocity in [m/s] IP 55 suction side = 1 / discharge side = 3 Max. system pressure in [bar] Max. temperature in [°C] * approx. at max. volume flow (higher density possible when flow rate is reduced) ** depends on motor supplier *** other voltages on request Materials You will find all materials available and their...

Open the catalog to page 13

All SONDERMANN PUMPEN + FILTER GMBH & Co. KG catalogs and technical brochures

  1. MAGSON MA/MM

    32 Pages

  2. MA type 4/4H

    2 Pages

  3. MM type 5

    2 Pages

  4. MM type 4

    2 Pages

  5. MM type 3

    2 Pages

  6. MM type 2

    2 Pages

  7. MM type 1

    2 Pages

  8. MAGSON MAU

    8 Pages

  9. MA type 7

    2 Pages

  10. MA type 6/6H

    2 Pages

  11. MA type 5/5H

    2 Pages

  12. MA type 4/4H

    2 Pages