One-Stop Aging Test Solutions Provider | Product Description The ST-UV-A Tower-Type UV Accelerated Weathering Test Chamber simulates the damaging effects of sunlight, rain, and dew to accelerate material weathering tests. Equipped with fluorescent UV lamps, a water spray system, and precise temperature control, it reproduces outdoor aging conditions through alternating UV exposure and moisture cycles. Featuring a large-capacity sample holder and multiple UV lamp options, it efficiently evaluates material fading, cracking, and performance degradation. ^Large-Capacity Sample Holder o Fluorescent UV Light Source (Supports up to 24 standard specimens.) (40 W UVA/UVB lamps with wavelength options.) Dual-Mode Weathering Simulation (UV exposure and water spray cycles.) HI Intelligent Irradiance Control (Touchscreen, multilingual support & remote monitoring.) | Technical Specifications Model Light Source Rated Lamp Life Adjustable Irradiance Range Black Panel Temperature Range Interior / Exterior Material Exposure Area Specimen Holders Water Supply Pressure Water Consumption Power Supply 6,000 hours (Under Normal Operating Conditions) Ambient +10°C to 80°C (Depending on ambient conditions and irradiance settings) SUS304 Stainless Steel / Powder-Coated Steel 5175cm2/828in2 24 holders (Up to 48 specimens, 150 x 70 mm each) Condensation: 7 L/day; Spray: 4 L/min AC 230 V ±10%, 50/60 Hz, 12 A (Other voltages available upon request);Power Consumption:2.5 kW 1300mmx600mmx1340mm(W x D x H)