Snow Scale Roof SSR-2 Snow load measurement on flat or slightly inclined roofs The snow scale SSR-2 is a measuring device for automatic and continuous measuring of snow load on flat roofs and roofs with an inclination of max. 5°. It is used for security issues of buildings and helps the facility manager and owner to reliably decide if there is an over-load for the roof statics with the current snow load. Security on the roof Extreme snow situations in winter and related roof collapses with personal injury show that the snow load measurement of flat roofs is a very important matter. Big amounts of snowfall followed by warm weather conditions with rain can be very critical for the statics of a roof. However, when exactly is the point reached, where the statics of the roof do collapse? How much snow is there on the roof already? Should there be done a clearing of the snow from the roof, which is very dangerous and cost intense, or is it still capable of carrying even more weight? Many very important questions, which can be easily solved by the installation of a SOMMER snow scale SSR-2. Features and advantages Automatic, continuous roof load measurement Individual alarm possibilities Increased building security Easy installation and operation No structural work at the roof needed No water reservoirs through perforated plates Minimum self-weight Minimum effort for maintenance needed Measuring principle and installation The working principle of the SSR-2 is based on the measuring principle of load cells. The sensor consists of seven perforated panels. The measurement is carried out on the centre plate, the surrounding plates serve as a stabilizing zone. This guarantees very accurate measuring data also with high snow loads. Despite the wide area of the SSR-2 it has a very low self-weight, to not further stress the roofing. The snow scale SSR-2 is very easily installed. First, a protection mat is put on the roof above it the frame and plates of the SSR-2 are spread. After installing a fitting panel this can be fixed with weights. It is recomended that the installtion is done by a professional roofer. The snow scales can now be integrated into the buildings system and limit values for the alarm can be set. Technical details

Measuring range 1,000 / 2,000 mm SWE Resolution 0.1 kg/m² ? 0,1 mm SWE Accuracy 0.3 % (FS) Measuring surface 6.72 m² Total weight 130 kg Dimensions 2800 x 2400 x 103 (L x W x H mm) Protection IP 68 Power supply 10 ... 30 VDC Power input max. 70 mA Operating temperature - 40 ... +80 °C Maximal inclination 5° Output SDI-12, RS-485 (ASCII and MODBUS), 4 ... 20 mA Others improved lightening protection Total weight 130 kg (16.37 kg/m²) Others cable, fitting panel, alarm system, data logging Installation variations Following variations for snow pressure and snow load measurement are possible: Snow...