Catalogs >
SOMMER Messtechnik GmbH >
RQ-30 / RQ-30a

RQ-30 / RQ-30a
2Pages

Catalog excerpts

Non-Contact Discharge Radar RQ-30 / RQ-30a Non-contact discharge measurement by means of radar technology for open rivers The RQ-30 is a sensor for continuous discharge measurement of rivers, open channels and canals with known crosssection profile. The sensor uses innovative radar technology to measure velocity, water level and discharge. It enables reliable, non-contact measurement without the need for structural work in the water. Features and advantages Non-contact, maintenance free measurement system No structural work is necessary in the water No threat to the system through flooding Low power consumption enables operation using solar cells Recognition of flow direction Measuring range from +/- 0.10 to +/- 15 m/s (depending on the flow conditions) Recognition of hysteresis-effects Measurement in backwater situations Measures even where weed growth prevails and sensor is not affected by turbidity Measurement in tidal waters Automatic angle measurement Optional (RQ-30a): analogue outputs from 4 to 20 mA Fields of application The RQ-30 enables discharge measuerment for rivers, streams, open channels and canals for which continuous monitoring is desired. Thanks to the non-contact radar technology the measuring equipment is not susceptible to contamination, debris or driftwood in the water. Furthermore, the non-contact measurement warrants very low maintenance and fail-safe operation especially during high water or flooding. Implementation The sensor can be simply mounted on bridges, on the roofs of closed canals or channel superstructures. The bed of the water should be as stable as possible in order to warrant consistent measurement. A visible swell must be evident on the

Open the catalog to page 1

Measuring principle The non-contact radar technology determines the water surface flow velocity using the Doppler frequency shift method and furthermore the water level is established by a travel time measurement. With known cross section profile the discharge Q of the water can then be calculated on basis of the continuity equation: Q = vm · A (h) Technical details General Dimensions 338 mm x 333 mm x 154 mm Total weight 5.4 kg Protection class IP 67 Power supply 6 ... 30 V Power consumption at 12V standby approx. 1mA; active operation approx. 140mA Operating temperature -35 ... 60°C...

Open the catalog to page 2

RQ-30 / RQ-30a 2Pages

Catalog excerpts

All SOMMER Messtechnik GmbH catalogs and technical brochures

RQ-30 / RQ-30a
2Pages