Ball valve Edition: 2012-10 Type SKV Flanged design Material Stainless steel • High capacity - full bore design • Excellent tightness differential pressure • Hardchrome plated or HiCo coated ball SOMAS ball valve type SKV is designed to meet the requirements of the process industry. The valves can be used for shut-off as well as for control applications within a wide temperature range. The valve body is made in one piece for DN 25-50, while DN 80-400 has a 2-piece body. The valve body is split beside the centreline of the shaft. The seats can be replaced without removing the actuator. Valve seats in HiCo are also available in locked- alternatively scraping design or a The SOMAS valves are delivered ready for installation and operation. The valve assemblies are delivered factory tested as complete units with actuators, • Easy maintenance

Tightness class The tightness class is related to the chosen material in the seat ring. PTFE 53 seat HiCo seat Pipe geometry factor FP Valve Flow characteristics 50% PTFE + 50% 1.4435 (316L) powder (percentage by weight) Pressure and temperature rating According to the material in the seat. Seat Code B T 10 bar = 1 MPa Note 1: Check with SOMAS 1 NB! Do not exceed working pressure for the valve. FLP1 = One dimension bigger pipe size FLP2 = Two dimensions bigger pipe size FLP3 = Three dimensions bigger pipe size Liquid pressure recovery factor FL Factor Fl Factor FL is valid for all sizes.

Capacity factor Kv and Resistance factor ξ for ball valve type SKV DN 25 40 50 80 100 125 150 200 250 300 350 400 Necessary closing torque Ball valve with PTFE 53-seats Valve Shaft DN dia. (mm) Ball valve with HiCo-seats Necessary closing torque (Nm) at ∆p (bar) 10 Necessary closing torque (Nm) at ∆p (bar) 20 Ball valve with PTFE 53-seats Valve Shaft DN dia. (mm) Ball valve with HiCo-seats Necessary closing torque (Nm) at ∆p (bar) Necessary closing torque (Nm) at ∆p (bar) 5 Selection table, hand lever Hand lever for ball valve with PTFE 53-seats at ∆p (bar) Valve Shaft DN dia. (mm) 10 20 30 40...

Selection table, pneumatic actuators type A-DA (air supply min. 5,5 bar) Valve Shaft DN dia. (mm) Actuator for ball valve with PTFE 53-seats at ∆p (bar) Actuator for ball valve with HiCo-seats at ∆p (bar) Actuator for ball valve with PTFE 53-seats at ∆p (bar) Actuator for ball valve with HiCo-seats at ∆p (bar) Selection table, pneumatic actuators type A-DA (air supply min. 4 bar) Valve Shaft DN dia. (mm) 25 Actuator for ball valve with PTFE 53-seats at ∆p (bar) Actuator for ball valve with HiCo-seats at ∆p (bar) 10 Actuator for ball valve with PTFE 53-seats at ∆p (bar) Actuator for ball valve...

Selection table, pneumatic actuators type A-SC/SO (air supply min. 5,5 bar) Valve Shaft DN dia. (mm) 25 Actuator for ball valve with PTFE 53-seats at ∆p (bar) 10 Actuator for ball valve with HiCo-seats at ∆p (bar) 10 Actuator for ball valve with PTFE 53-seats at ∆p (bar) 5 Actuator for ball valve with HiCo-seats at ∆p (bar) 5 SC = Spring to close SO = Spring to open Selection table, pneumatic actuators type A-SC (air supply min. 4 bar) Valve Shaft DN dia. (mm) Actuator for ball valve with PTFE 53-seats at ∆p (bar) Actuator for ball valve with PTFE 53-seats at ∆p (bar) Actuator for ball valve...

Face to face dimension A1 = Face to face dimension according to EN 558 series 4 (PN 25, PN 40) A2 = Face to face dimension according to EN 558 series 4 (PN 20, PN 50, Class 150, Class 300)

Ball valve type SKV with actuator type A-DA For units with the positioner type SP405, add 2 kg For units with the positioner type SPE405, add 3 kg

Ball valve type SKV with actuator type SR H K O R R1 850 850 1105 190 190 850 850 1145 190 190 For units with the positioner type SP405, add 2 kg For units with the positioner type SPE405, add 3 kg

Flange standard SOMAS ball valves type SKV in this data sheet are equipped with flanges. The valve sizes DN 25-50 can be drilled for PN 40, Class 150 / ISO PN 25 and Class 300 / ISO PN 50, while DN 80-400 can be drilled for PN 10, PN 16 and PN 25 and Class 150 / ISO PN 20. The valves can be fitted with SOMAS manual, on/off or control actuators in accordance with the selection table. The valves will then be delivered as tested units ready for installation. When ordering, please always state the pressure rating of the counter flanges. See the valve specification system on page 12, code 11. Check...

Ordering State desired valve according to the valve specification system below as well as type of actuator, positioner and accessories. Valve specification system Material – ball Flanged design Valve body design Bearings – valve body/shaft 1 = Without bearing 1 = Graphite J = HiCo, locked seat Material – valve body K = HiCo, scraper seat Drilling, counter flanges, PN/Class M = HiCo, locked seat + scraper seat Material – seat Nominal pressure Material – shaft T = HiCo (High Cobalt alloy) 50% PTFE + 50% 1.4435 (316L) powder (percentage by weight) DN 25-50 SOMAS reserves the right to make improvements...