Use: Concrete, tubes, angles Standard: EN 353-1 | EN 353-2 Verticale lifeline SECURIFIL® verticale inox Stainless steel vertical lifeline Description: SECURIFIL® verticale inox is a lifeline designed to secure vertical movements. It is suitable for ladders, tubes or angles as well as concrete. Material: Stainless steel SECURIFIL® verticale inox is for exclusive use with a mobile fall arrester supplier by SOMAIN. Finish: Shot-blasted or powder-coated This is connected to the user’s harness and locks on the cable if the user falls Setup: Delivered with manuals and drawings available online at: http://extranet.somain.fr Advantages SECURIFIL® verticale inox is guaranteed for 10 years. Non-deformable, SECURIFIL® verticale inox remains operational immediately after a user falls. It ensures the safety of the rescuers and avoids the need to repair the device. The SECURIFIL® verticale inox lifeline can be installed with the appropriate support onto a concrete wall, ladder, angle or square/round tubes. If your case presents specific constraints, our design office will be able to propose an appropriate solution. Options Available with special galvanised or stainless steel supports. Specific RAL colour on request. Additional information Exclusive mobile fall arrester: SKC H04 EVO Designed to be used on on the SECURIFIL® verticale inox lifeline with a 8mm diameter stainless steel cable. Includes an energy absorber and a triple action and anti-reversal opening system for more security. For a user of 50 to 140 kg maximum. Fixed on concrete 7, rue de Monterrad 42500 Le Chambon-Feugerolles, France Phone : +33 (0)4 77 40 54 38 E-mail : [email protected] / Website : www.ibyd.fr

Use: Concrete, tubes, angles Standard: EN 353-1 | EN 353-2 Vertical lifeline SECURIFIL® verticale inox + Elements These components constitute all SECURIFIL® verticale inox lifelines. Stainless steel end for concrete support. Fixing: 2 M12 17 Stainless steel intermediate for concrete support. Fixing: 117M12 To be installed at distances of 8 metres. 51 108 MAXI. Adjustable stainless steel end (For round tubes up to a 60mm diameter max or square tube wit a 90mm max section). 2 ECROU FREIN M12 INOX A2 100147 4 4 RONDELLE M 12 INOX A2 100101 3 2 VIS HM12x110 INOX A2 T.F. 101078 . 2 1 S/E EXTREMITE...

Use: Concrete, tubes, angles Standard: EN 353-1 | EN 353-2 Verticale lifeline I SECURIFIL® verticale inox[+ Elements These components constitute all SECURIFIL® verticale inox lifelines. Stainless steel absorber with clevis, installed at the upper end, reduces stress in case of fall. Stainless steel cable diameter 8 mm 7 x 19. Crimping set + stainless steel wire Mandatory Poster : wearing of PPE, to be installed Raw aluminium plate for mandatory poster. at each access to the lifeline. Available, on request, in the language of your choice with the possibility to insert your logo. 7, rue de Monterrad...

SECURIFIL® verticale inox Use: Concrete, tubes, angles Standard: EN 353-1 | EN 353-2 Vertical lifeline + Elements These components constitute all SECURIFIL® verticale inox lifelines. Tensioner eye/clevis stainless steel. Compliant with EN 353-1. Installed at the lower end, it allows the adjustment of the cable tension. Set of 3 cable clamps and a stainless steel wire thimble. Compliant with EN 353-1. The jumpers must be installed on the side of the dead strand with a gap of about 4 cm. SOMAIN Sealing. Attaches to tensioner to prevent cable tension from changing. Traceability by a unique serial...