Use: Pylon, angle structures Standard: EN 353-1 Vertical lifeline SECURIFIL® verticale pylône Lifeline for metal pylon Description: SECURIFIL® verticale pylône is a lifeline designed to Material: Stainless steel secure vertical movements on metal masts. The fixations are specifically adaptable on angles of different sizes and thicknesses used for the manufacturing of masts. Setup: Delivered with manuals and drawings available online at: http://extranet.somain.fr This lifeline is to be used exclusively used with a fall arrester supplied by SOMAIN. It is connected to the user’s harness and locks on the cable if the user falls. 7, rue de Monterrad 42500 Le Chambon-Feugerolles, France Phone : +33 (0)4 77 40 54 38 E-mail : [email protected] / Website : www.ibyd.fr

SECURIFIL® verticale pylône Use: Pylon, angle structures Standard: EN 353-1 Vertical lifeline + Elements These components constitute all SECURIFIL® pylône lifelines. Raw stainless steel bracket REF : 101935 Bottom and top end in stainless steel painted for mast. Stainless steel intermediate with 160 mm extension cable. Stainless steel painted clamping plate for angles REF : 101952 Stainless steel cable diameter 8 mm 7 x 19. Crimping set + stainless steel wire thimble. Stainless steel absorber with clevis, installed at the upper end, reduces stress in case of fall. E-mail : [email protected] / Website...

Use: Pylon, angle structures Standard: EN 353-1 Vertical lifeline SECURIFIL® verticale pylône + Elements These components constitute all SECURIFIL® pylône lifelines. Exclusive mobile fall arrester: SKC H04 EVO Tensioner eye/clevis stainless steel compliant with EN 353-1. Installed at the lower end, it allows the adjustment of the cable tension. Set of 3 cable clamps and a stainless steel wire thimble compliant with EN 353-1. The jumpers must be installed on the side of the dead strand with a gap of about 4 cm. Designed for use on a lifeline SECURIFIL® verticale pylône 8mm diamter stainless steel...