Use: Parapet, wall Standard: EN ISO 14 122-3 | NF E 85-015 Guardrail SECURILISSE® evo GCE-RE Under sealing (under the coping cover) Description: The SECURILISSE® evo GCE-RE is a collective system against falls from heights, designed for roofs that are inaccessible to the public for installation under a coping cover. The base is fixed on the upper face of the parapet, under the coping cover. Details: Material: Aluminium Finish : Raw, anodised or powder-coated Available version : Straight or inclined The base requires only one M12 fastener Setup : Delivered with manuals and drawings available online at: http://extranet.somain.fr GCE-RE (straight) 1 Straight guardrail with midrail: GCE-RE2 The SECURILISSE® evo GCE-RE2 is used to mount on a 100 to 570 mm high parapet with a coping cover. REF : 100255 Base for fixation under cover coping. Fixing: 1 M12 7, rue de Monterrad 42500 Le Chambon-Feugerolles, France Phone : +33 (0)4 77 40 54 38 E-mail : [email protected] / Website : www.ibyd.fr REF : 102331 Straight upright with midrail. Length depends on the height of the parapet. REF : 102329 Straight upright without midrail. Length depends on the height of the parapet (higher than 570mm)..

Use: Parapet, wall Standard: EN ISO 14 122-3 | NF E 85-015 2 Straight guardrail without midrail: GCE-RE1 The SECURILISSE® evo GCE-RE1 is used to mount on a higher than 570 mm parapet with coping cover. Offset version of z-shaped guardrail: GCE-RED The SECURILISSE® evo GCE-RE1D and the GCE-RE2D are suitable for parapets equipped with an insulation and a coping cover. The GCE-RE baseplate is bolted to the offset plate. The latter is fixed on the upper face of the parapet, under the coping cover. REF : SPECIAL Aluminium offset plate. Tailor-made part as its length depends on the thickness of the...

Use: Parapet, wall Standard: EN ISO 14 122-3 | NF E 85-015 Guardrail SECURILISSE® evo GCE-RE Under sealing (under the coping cover) The SECURILISSE® evo GCE-REI is a collective system against falls from heights, designed for roofs that are inaccessible to the public and for an installation under a coping cover. The base is fixed on the upper face of the parapet, under the coping cover. The 30-degree inclined version is chosen for aesthetic reasons as it is less visible from the ground. Material: Aluminium Finish : Raw, anodised or powder-coated Available version : Straight or inclined Setup :...

Use: Parapet, wall Standard: EN ISO 14 122-3 | NF E 85-015 2 Inclined guardrail without midrail: GCE-REI1 The SECURILISSE® evo GCE-REI1 is used to mount on a parapet higher than 630 mm with a coping cover. Offset version of z-shaped guardrail: GCE-REI The SECURILISSE® evo GCE-REI1 and the GCE-REI2 are suitable for parapets equipped with an insulation and a coping cover. The GCE-RE baseplate is bolted to the offset plate. The latter is fixed on the upper face of the parapet, under the coping cover. REF : SPECIAL Aluminium offset plate. Tailor-made part as its length depends on the thickness of...