fall arrest systems
36Pages

{{requestButtons}}

Catalog excerpts

fall arrest systems - 1

Collective and personal fall protection devices and equipment Personal protective

Open the catalog to page 1
fall arrest systems - 2

Long-standing experience Maintaining safety must be a natural act that goes without thinking. For over 20 years, SOMAIN SECURITE has focused the development of its product lines around 3 pillars: Devices must be adapted for optimal safety anywhere in the work area. There should be no constraints, obstacles or complications to hinder the user from maintaining his or her safety. Systems must be available for use under any circumstances, year after year. SOMAIN SECURITE equipment holds up under stresses greater than those required the standards. Our internal engineering department designs them...

Open the catalog to page 2
fall arrest systems - 3

EN 14122-3 Standard collective protection Metal deck Flat / bracket Assembly components SECURITOIT® Passageways & stairways Passageways for fragile or slippery roofs Standard passageways Divided passageway / stairway Crossover ladder SECURECHELLE Ladders Hoop ladder Sample of our primary personal protective equipment Anchor points Standard EN 795 Class A1 personal protection Anchor posts Standard EN 795 Class C personal protection Standard EN 795 Class D personal protection

Open the catalog to page 3
fall arrest systems - 4

SECURILISSE ® EN ISO 14 122-3 & NF E 85-015 Aluminum railing is a line of railings providing collective protection that meets current standards. SECURILISSE ® The SECURILISSE ® alu components are light and strong. This railing is easy to install, without welding on site; it is delivered in 3 or 6-meter lengths to facilitate handling. It is assembled using cast aluminum parts attached with bead screws Various versions are available depending upon the configuration of the area to be secured. Use SOMAIN 3D to automatically calculate the SECURILISSE ® installation and the number of parts...

Open the catalog to page 4
fall arrest systems - 5

STANDARD Label SECURILISSE® metal deck Railing EN ISO 14 122-3 & NFE 85-015 Conformity System NEW NEW PRODUCT Maintenance free Aluminum railing for metal deck delivered in a KIT. It attaches to the metal deck with galvanized steel plates into which standard anchoring parts are screwed. The SECURILISSE® is anchored into the metal deck with drywall screws. A seal is maintained by attaching a joint in advance between the metal deck and the adapter plate. Oval section Made of ext r uded al um i num , it mak es up t he st ud, str ut, an d r ai l i ng T connector Standard cast a l u m i n u m...

Open the catalog to page 5
fall arrest systems - 6

Railing STANDARD EN ISO 14 122-3 & NFE 85-015 System Conformity Label SECURILISSE® free-standing Ship Ships Ships p within within in within in ithi Maintenance free 48 hours The SECURILISSE ® alu freestanding allows installation of a railing without having to drill through the building seal. The studs are ballasted with concrete blocks. This railing is intended to provide the most economical and practical solution in terms of handling and installation. Special thermo lacquered version 4 - s t e p s tu d i n s ta llati o n T connector Standard cast aluminum part Attached by 3 bead screws...

Open the catalog to page 6
fall arrest systems - 7

Flat stud foundation Molded aluminum Anchoring: 2 M12 Dowel pins Paneled stud foundation Molded aluminum Railing with Railing with Railing with middle rail and toe-kick Railing with middle rail and toe-kick

Open the catalog to page 7
fall arrest systems - 8

Adapter plate under cap galvanized steel Anchoring: 2 M12 Dowel pins Delivered without foundation GCA12 Railing with Single folding anchor Galvanized steel Anchoring: 2 M12 Dowel pins Double folding anchor Galvanized steel Anchoring: 2 M12 Dowel pins The folding SECURILISSE9 alu is invisible when it is in the low position. It is used on buildings Folding CRE2 where aesthetic constraints require collective protection equipment to be hidden. The folding SECURILISSE9 alu is supplied in three-meter-long aluminum frames. The studs are attached to jointed anchors that allow the assembly to rotate.

Open the catalog to page 8
fall arrest systems - 9

The components of the SECURILISSE alu offer great adaptability. Le SECURILISSE0 alu is delivered in a kit. The middle rail and the oval section are delivered in 3 or 6-meter lengths. It can be assembled on site, without welding using the connecting parts described below. However, we can cut the studs in our workshop at your request. Oval section Railing junction. Horizontal angle sleeve Vertical angle sleeve Articulated horizontal angle sleeve stud - railing stud - railing Railing - wall Aluminum toe-kick Aluminum middle rail Aluminum sleeve connector middle rail Aluminum angle sleeve...

Open the catalog to page 9
fall arrest systems - 10

With toe-kick A toe-kick is required when the acroterion height is less than 150 mm. If there is no acroterion, the space between the lower edge of the toe-kick and the floor must not exceed 10 mm and the toe-kick must be at least The provisions concerning fall prevention must be included in the Dossier d'Intervention Ultérieur sur l'Ouvrage (D.I.U.O. - Structure maintenance file). The minimum height of the railing must be at 1000 mm in relation to the traffic floor. The free space under the railing must The distance between studs should preferably be limited to 1500 mm. However, if this...

Open the catalog to page 10
fall arrest systems - 11

I A pathway on a fragile or slippery roof can be I secured with aluminum decking. It can be equipped I with railings, stairways, gates, etc. Consult us for all special designs; our engineering office is at your service to study the feasibility of your

Open the catalog to page 11
fall arrest systems - 12

Passageway STANDARD EN ISO 14 122 System Conformity SECURITOIT ® V3 A completely adaptable passageway. SECURITOIT® V3 is the new aluminum passageway developed this year by the SOMAIN SECURITE engineering department. The SECURITOIT® V3 pathway is composed of 800 mm wide aluminum decking sections (standard). The section that constitutes the girders was designed to support the decking and accept an optional railing and toe-kick. All supports 10 Railing anchors Detail of the section

Open the catalog to page 12
fall arrest systems - 13

Label NEW NEW PRODUCT Maintenance free A Global solution We developed a stairway section specially adapted to the SECURITOIT® V3. Thus, the SECURITOIT® line has a coherent and complete compliance solution for pathways and level changes in technical areas. Angle connector Aluminum railing Aluminum section toe-kick Standard decking Left-side exit Passageway connector plate Stairway to passageway connector plate Passageway end cap New stairway section Step width 800 mm With toe-kick 800 mm step 11

Open the catalog to page 13

All SOMAIN SECURITE catalogs and technical brochures

Archived catalogs

  1. Railing

    7 Pages

  2. Lifeline

    13 Pages