1. Catalogs
  2. Solidscape
  3. Material Safety Data Sheet - 3Z Model
video corpo

Material Safety Data Sheet - 3Z Model

Material Safety Data Sheet - 3Z Model

Material Safety Data Sheet - 3Z Model

Product catalog summary
Chemical Product and Company Identification
Product Name: 3Z Model
Chemical Family: Organic Intermediate
Manufacturer: Solidscape®, Inc., Merrimack, NH, USA
Contact: Tel: (603) 429-9700, Email: [email protected]

Composition, Information on Ingredients
Primary components include Sulphonamide Derivatives (60-100%), Polyester Resin (0-50%), and Benzoate Derivatives (0-10%). All are trade secrets with no specific classification.

Hazard Identification
Potential for thermal burns from molten material. May cause skin and eye irritation upon exposure.

First Aid Measures
Inhalation: Not expected to be an issue.
Eyes: Flush with water, seek medical attention if irritation persists.
Skin: Wash with soap and water.
Ingestion: Seek medical attention if large amounts are ingested.

Fire-Fighting Measures
Flash Point: > 347°F (175°C). Use water fog, carbon dioxide, or foam to extinguish. No unusual hazards.

Accidental Release Measures
Moisten with water to reduce dust, sweep up, and dispose of properly.

Handling and Storage
Avoid excessive heat and open flames.

Exposure Controls and Personal Protection
Respiratory protection not typically necessary. Use dust respirator if needed. Protective gloves and eye protection recommended for handling molten material.

Physical and Chemical Properties
Melting Point: 221° - 239°F (95°- 115°C). Specific Gravity: ~1.25. Appearance: Blue/Gray solid with faint odor.

Stability and Reactivity
Stable under normal conditions. Avoid strong oxidizing agents. Decomposition may produce oxides of carbon, nitrogen, and sulfur.

Toxicology Information
No mutagenic activity reported. Not listed as a carcinogen.

Ecological Information
COD: ~1,600mg/g, BOD5: ~220 mg/g.

Disposal Considerations
Dispose of in accordance with regulations.

Transport Information
Not regulated for shipping.

Regulatory Information
Registered by TSCA. Not classified as hazardous by OSHA.

Other Information
NFPA and HMIS hazard ratings: Health 1, Flammability 1, Reactivity 0.
This information is provided without warranty and users should conduct their own tests.
See more

Catalog excerpts

Material Safety Data Sheet - 3Z Model-1

Material Safety Data Sheet 840163 Issue Date: January 2, 2012 3Z Model 1. Chemical Product and Company Identification Product Name: Chemical Family: 3Z Model Organic Intermediate Solidscape®, Inc. Tel: (603) 429-9700 316 Daniel Webster Highway Fax: (603) 424-1850 Merrimack, NH 03054 USA E-mail: [email protected] Web Site: www.solid-scape.com 2. Composition, Information on Ingredients Ingredients Sulphonamide Derivatives Polyester Resin Benzoate Derivaties Trade Secret Trade Secret Trade Secret None None 3. Hazard Identification Burns: Signs and Symptoms of Exposure: Acute Overexposure: Contact with molten material may cause thermal burns. Potential skin and eye irritant. Chronic exposure to skin may cause irritation. May cause eye irritation. 4. First Aid Measures Inhalation: Eyes: Skin: Ingestion: This material is not expected to create an inhalation problem. Flush with plenty of low pressure water. If irritation exists, obtain medical attention. Wash exposed skin area with soap and water. If large amounts of product are ingested obtain medical attention. 5. Fire-Fighting Measures Flash Point: > 347° F (175° C) COC Extinguishing Media: Waterfog, carbon dioxide or foam. Special Fire Fighting Procedures: Cool fire exposed containers with water. Unusual Fire and Explosion Hazards: None. Page 1 of 3

 Open the catalog to page 1
Material Safety Data Sheet - 3Z Model-2

Material Safety Data Sheet 6. Accidental Release Measures Steps to be taken in case material is released or spilled: Moisten slightly with water to reduce dusting. Sweep up spilled material and discard into proper waste container. 7. Handling and Storage Precautions for Handling and Storage: Avoid excessive heat and open flame 8. Exposure Controls and Personal Protection Respiratory Protection: Normally none necessary. An approved dust respirator should be used if high levels of airborne particulates are generated. Local exhaust. Normally none necessary. Protective gloves are recommended for...

 Open the catalog to page 2
Material Safety Data Sheet - 3Z Model-3

Material Safety Data Sheet 13. Disposal Considerations Waste Disposal Methods: Dispose of in accordance with federal, state and local regulations. 14. Transport Information This product is not regulated for shipping. No transport labels required. Not regulated by DOT. Registered by TSCA. Major components are not hazardous substances as defined by OSHA ( 29 CFR 1910.1200 ) OSHA Permissible Exposure Limit: Not established. ACGIH Threshold Limit Value: Not established. Health Flammability Reactivity Hazard ratings NFPA 1 1 0 This information is furnished without warranty, representation, or license...

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.