™ SCSIFlash SCSIFlash™ SCSI1/SCSI250 pin Magneto Optic (MO) OEM Emulator to CF (SCSI Emulator for SCSI Drives) Emulated Disk Sector sizes 256-4096 bytes SPECIFICATIONS Form Factor: 3.5” form factor – 102mm (4”) wide x 147mm (5.75”) long x 25mm (1”) high* * Note other height options are available DESCRIPTION The SCSIFlash™ is an integrated solution that utilizes proven SCSI drive architecture and industrystandard Compact Flash Card technology, providing a solid state, drop-in replacement for electromechanical hard drives. The SCSIFlash™ is an industrial OEM grade solid state drive which allows Compact Flash (CF) cards of up to 128GB (host dependant) to be attached to a regular SCSI bus. It will be seen as a SCSI Magneto Optic drive by the host computer. The SCSIFlash™ can emulate many SASI, SCSI-1, or SCSI-2 drives and can be programmed to suit the host systems requirement. Emulated Disk Sector sizes can be 256, 512, 768, 1024, 2048, 4096 bytes. The SCSIFLASH™ PCB allows service providers & OEM's to have a quick, low-cost flash memory solution for their legacy system through our configurable firmware that matches legacy systems software. Compact Flash: Standard 3M header for Type 1 & 2 cards Power: 5 Volts only @ 0.8 Watt (Typical) + CF requirement Power connector: Standard Disk drive type SCSI-1 and 2 Compatible. 50 pin DIL 0.1" Connector SCSI transfer rate: 10Mbytes/second Benefit Ÿ Firmware controlled by SCSI interface is adaptable to hosts' software SCSI drivers Ÿ Provides a transparent interface from the SCSI bus to solid state Flash Ÿ Eliminates the problems found in traditional electro-mechanical/magnetic media storage devices USB Port for microcode load and real time diagnostics Ÿ Fast, efficient field replacement Ÿ Lower power consumption, noise and heat Ethernet capability Ÿ Fast write speeds Ÿ Increased reliability Master Image (.img) /mirroring capability Ÿ Reduced unplanned downtime Ÿ No additional software required for operation due to its SCSI data storage/bootable drive Example Magneto Optic emulations: DEC, Fujitsu, Hitachi, HP, IOMEGA, Konica, Maxoptix, Olympus, Pioneer, Ricoh, SONY, SYQUEST, TEAC. Ÿ Small format PCB converts Compact Flash Media to appear as a SCSI Magneto Optic (MO) device on a Host's SCSI bus Ÿ 3.5" form factor PCB which will replace any 3.5" MO drive or larger drives with adaptor Ÿ Will fit in a 3.5" disk slot using the same mountings Ÿ SCSI Host will typically see the device as a disk drive of any emulation Ÿ Board is low power, using 5V only Ÿ Microcode is field upgradable via integral USB port Ÿ Optional integration support available if required Solid State Disks Ltd manufacture, design & support sales of the SCSIFlash™ drive through our head office in Reading, United Kingdom. Example systems available for fixed disk emulations: Alcatel S12 & 1631, Alcatel-Lucent DACS III/IV, Applied Materials, AMAT, Cannon, DEC VAX, Encore, Evans & Sutherland, HP 9000 series 800, HP 9000 series 500, HP 9000 series 300, HP 1000 A Series, OMTI DTC51, Honeywell Measurex, MX-OPEN, Rosemount RS3, Sun Spark & Siemens EWSD. Support covers the following Operating Systems: HP-UX, HP-RTE, HPL, VMS, IRMx, OS/400, OMTI, GCOS, BOSS, The SCSIFlash™ is a recognised Trademark of Solid State Disks Ltd. Solid State Disks Ltd The Granary Hose Hill Sulhamstead Berks RG7 4BB United Kingdom Tel: +44 (0) 118 9323 499 Fax: +44 (0) 118 9323 510 Email: [email protected] web: www.ssd.gb.com VXworks, OS2, DEC VMS, RSTS, OSF, MXopen system QCs, UNIX, Solaris, Symbios Logic, SASI, He