ALLIANCE Multi-Operator DAS Ordering Guide Version 1.1 – March 2023 ©SOLiD. All Rights Reserved. Confidential & Proprietary.

Ordering Guide The ALLIANCE DAS user documentation consists of these volumes: • iBIU Headend Operations and install Guide • N2ROU 2W Remote Unit Operations and Install Guide • MROU 5W Remote Unit Operations and Install Guide • HROU 20/40W Remote Unit Operations and Install Guide • MPROU Multi-power Remote Unit Operations and Install Guide • High Power Mid-Band Remote Optic Unit (HROU_4000) Operations and Install Guide • PS2ROU Public Safety 2W Remote Unit Operations and Install Guide • Fiber2Antenna edgeHUB/edgeROU Operations and Install Guide • Add-on Remote (AOR /AOR_2W) Operations and Install...

Ordering Guide Version 1.1 - March 2023 ©SOLiD. All Rights Reserved. Confidential & Proprietary.

Ordering Guide The ALLIANCE platform is SOLiD’s multi-operator, neutral host Distributed Antenna System (DAS) for efficiently delivering wireless RF signals into buildings, campus environments, stadiums, airports, underground transit systems, or any other location that is traditionally difficult to cover with outdoor macro wireless networks. The following document provides guidance for ordering and configuring ALLIANCE DAS components which include: • Integrated BTS Interface Unit (iBIU) • Integrated Optical Distribution Unit (iODU) • Integrated Optic Expansion Unit (iOEU) (optional fiber MUX...

Ordering Guide The Integrated Base Station Interface Unit (iBIU) is the central input point for all source signals sent and received over the DAS. For deployments requiring support for more than 16 services per sector, the DAS headend can support a secondary iBIU that interfaces directly with the main iBIU. The iBIU supports up to two integrated 4-port or 1 -port optic modules (iOMs). The iBIU can also be configured with any combination of integrated Point of Interface (POIs) modules: high power (20W), low power (100mW), or hybrid (high and low power). MCDU SCDU Optic Modules (iOMs) 1. For each...

Ordering Guide alliance das 4. Select iMDBUs to match desired bands and capacity. Bands are identified in the part number. Modules with suffix “_M” are for MIMO applications. Each iBIU can support up to four iMDBUs. Main/secondary configuration (see below) can support up to eight iMDBUs. NOTE: iMDBU_7_8_9_V/U (for VHF/UHF frequencies) is only supported in the main iBIU. 5. Order blanks (iBIU_B) for any empty iMDBU slot. 7. Optional: If you need additional optical ports, the secondary iBIU can support one or two optic modules. Follow the same guidelines as described in Step 3 above. Also order...

Ordering Guide alliance das8. Order Point of Interface modules (POIs) (for both main and secondary iBIUs) to match carrier equipment input power levels. POI frequency band must match corresponding iMDBU frequency band. (For iMDBU_7_8_9_V/U use LPOI_SPLX_T 10_R35.)If the system will support C-Band (3700~3980MHz) or Auction 110 (3450~3550MHz), use the “_4000” versions of the LPOI, HPOI, or HLPOI. POI Description Section 2 - Integrated Base Station Interface Unit (iBIU) 7 of 27

Ordering Guide Each iODU is equipped with one or two integrated optic modules, either 4-port (iOM_4s) or 1-port (iOM_1s). Each sector can support up to four iODUs. The number of iODUs required will depend on the optical port capacity required for your DAS configuration (dictated by the number of remotes and/or iOEUs in the DAS): • The main iBIU is typically equipped with one or two iOMs. These iOMs serve as iODU #1 for the system. If more optical capacity is needed, you can order up to three additional iODUs. • If your system will use a secondary iBIU, it can also be equipped with iOMs. (These...

Ordering Guide The DMS-1200 is SOLiD’s DAS management system that provides alarming, diagnostic, and control for the SOLiD ALLIANCE DAS platform, and it provides an enterprise level interface between the DAS and your Network Operations Center (NOC). The DMS-1200 gathers vital system information and alarm data from up to 20 iBIUs and transmits via SNMP to the designated NOC facility for monitoring. Configuration Guidelines 1. Order a DMS-1200 unit. The unit ships with the power cable and (1) straight type 2m CAT6 Ethernet cable. One DMS-1200 can provide management functions for up to 20 iBIUs....

Ordering Guide This remote unit can support up to seven bands simultaneously. Additionally, the unit can support VHF and UHF bands by connecting the optional Add-on Remote (AOR). N2ROU Configuration Guidelines 1. Select the N2ROU base model with AC or DC power. Base model includes: 7-band multiplexer, CPU, power unit, R-Optic unit, and 4 amplifiers providing 700LTE full band (incl. 700 Band 14), 800 (legacy Sprint) / 850 MHz, 1900 PCS, and 2100 AWS 1+3. 2. Optional: For additional bands, order the corresponding amplifiers (N2RDUs 600, 2300, or 2500). 3. Optional: To support VHF/UHF, order the...

Ordering Guide The Public Safety 2W Remote Optic Unit (PS2ROU) can support up to five bands for public safety, paging and 2-way communications. The PS2ROU uses a red-colored enclosure to comply with public safety product requirements. PS2ROU Configuration Guidelines 1. Select the PS2ROU base model with AC or DC power. Base model includes Multiplexer, CPU, power unit (AC or DC), R-Optic unit, and wall mount brackets. 2. Order the corresponding amplifiers for the bands you need: (PS2RDU_800PS_700PS_FN, PS2RDU_900_PA, PS2RDU_E_VH F_U H F). 3. If the remote will support only the PS2RDU_800PS_700PS_FN...

Ordering Guide The ALLIANCE Mid-power 5W Remote Optic Unit (MROU) supports up to seven bands simultaneously. The Add-on Remote unit (AOR) can also be connected to support VHF/UHF. 1. Select the MROU with AC or DC power. The default MROU includes the power unit (AC or DC), R-Optic unit, CPU, external fan, and CU7 combiner which handles the bands: 600/700LTE+FN, 850IC, PCS, AWS13, 2300, 2500. Section 7 - 5W Remote Optic Unit (MROU)