VELOGET 3D SEISMOMETER Veloget 3D Seismometer with high sensitivity sensors designed for HVSR and seismic and civil monitoring. Class I triaxial seismometer, compliant with DIN 4150- 3, DIN 45669-1 and UNI 9916. It is supplied in a metal case IP68 rated with cable output, for installations even in presence of water, with adjustable feet and control bubble. It can be also supplied with connector output with IP65 rating. Available in single, biaxial or triaxial triaxial, configuration for vertical or horizontal applications, with military connector or cable gland for fixed installations. It consists of an electronically linearized geophonic triad, with dynamics greater than 130dB. A special system on the bottom plate allows fixing to the floor/wall with a single plug and the three adjustment screws ensure leveling. The internal electronics permit execution of sensor test to check functionality by driving the dedicated test input. APPLICATIONS • HVSR measurement • Civil monitoring • Seismic networks Solgeo - Via Pastrengo, 9 - 24068 Seriate (BG, Ita

VELOGET 3D SEISMOMETER TECHNICAL CHARACTERISTICS Model Solgeo VELOGET 3D (2D, 1D optional) Electronically equalized geophone Measure range ± 125 mm/s or ± 12,5 mm/s @16Hz see nomogram measuring range Output voltage Frequency response Operating voltage Output impendance Dynamic range Spectral noise Case to coil motion Active self-test, impulse 10 mm/s Contact now your dedicated consultant: [email protected] +39 035 4520075 ENVIRONMENTAL Temperature, operating Temperature, storage PHYSICAL CHARACTERISTICS Weight Case material Anodized Aluminium Protection rating IP65 with connector or IP68 with cable...