DYMAS 24 ALBEN

Product catalog summary

Overview
The Dymas 24 Alben is a multi-channel digital acquisition system designed for long-term monitoring of structures such as dams. It supports up to 30 channels in multiples of 6, housed in a single cabinet, and can be fixed to a wall or floor. Communication is primarily via LAN, with optional remote connections through 4G modem, fiber optic, or WiFi. The system integrates with DYMASOFT software for efficient dynamic monitoring.

Applications
- Civil and industrial long-term monitoring

Technical Characteristics

Input Channels: 12, 18, 24, or 30 channels
Configuration: Standalone or multi-station network
Synchronization: Internal RTC synchronized via GPS or LAN
Triggering Mode: Threshold level and/or STA/LTA, selectable per channel
Data Storage: 32 GB internal memory, optional external USB
Power Consumption: 5W for basic 6 channels, plus 2W for each additional group of 6 channels
Communication: Ethernet TCP/IP, optional 4G or WiFi
Converter: 24-bit Sigma/Delta for each channel
Sampling Rate: Selectable from 10Hz to 8kHz
Dynamic Range: > 130 dB@100Hz
Programmable Gain: 1-2-4-8-16-32-64-128

External Interfaces

GPS: External GPS for time synchronization
Power: 10 VDC to 18 VDC, with automatic battery safe function
Standard Sensors: Seismometers, Force Balance and MEMS Accelerometers, Geophones
Other Sensors: 4-20mA output and IEPE sensors (optional modules required)
Comm. Interfaces: Ethernet port, optional 4G or WiFi
Other Interfaces: USB 2.0, Digital inputs/outputs

Physical Characteristics

Cabinet: Metallic, IP65 protection grade
Working Temperature: -20°C to +70°C
Humidity: 0-100% non-condensed
Dimensions: 280x200x130mm up to 18CH, 280x200x160mm
Weight: 2.6 Kg

Contact Information
For more details, contact Solgeo at [email protected] or +39 035 4520075.

Catalog excerpts

DIGITAL ACQUISITION DYMA S 24 ALBEN The Dymas 24 Alben is a multi-channel acquisition system suitable for long-term monitoring of dams and structures in general where it is required the installation of many dynamic sensors, accelerometer or velocimeters. This digital acquirer allows to acquire up to 30 channels in multiples of 6, placed in a single cabinet with wall or floor fixing. The communication system runs via LAN; the remote connection to the system can be made via optional 4G modem, FIBER OPTIC, WiFi. The software DYMASOFT, integrated with the data processing software VIBROSOFT or SOLWEB, allows to realize efficient dynamic monitoring networks. APPLICATIONS • Civil and industrial long-term monitoring Solgeo - Via Pastrengo, 9 - 24068 Seriate (BG, Italy)

Open the catalog to page 1

DIGITAL ACQUISITION DYMA S 24 ALBEN TECHNICAL CHARACTERISTICS Input channel Standalone or multi-station network Internal RTC synchronized via GPS or via LAN by using UTM module, simultaneous sampling Triggering mode Threshold level and/or STA/LTA, selectable for each channel Recording triggering Internal/external trigger or scheduled acquisition; Selectable pre/post-trigger length; Recording of pick values (Min-Max), according to DIN 4150 part II, internal selectable from 10 to 100s Data storage 32 GB internal memory, optional external USB flash disk on request Temperature, sensors test Power...

Open the catalog to page 2

DIGITAL ACQUISITION DYMA S 24 ALBEN EXTERNAL INTERFACES GPS External GPS for time synchronization, RS-422 interface 10 VDC to 18 VDC (automatic turn OFF ‹10,8 V, turn ON ›12,0V with battery safe function enabled). 120/240 VAC adapter can be provided as optional Standard sensors Seismometers, Force Balance and MEMS Accelerometers, Geophones, other output voltage sensors Other sensors 4-20mA output and IEPE sensors (require optional modules) Comm. interfaces Ethernet port (4G or WIFI optional) Other interfaces PHYSICAL CHARACTERISTICS Cabinet Metallic cabinet (Protection IP65 grade or higher with...

Open the catalog to page 3