*mydirectindustry

AMS-PLUS

Product catalog summary

Overview: The AMS-PLUS MEMS seismic accelerometer is designed for high sensitivity measurements of low-intensity accelerations ranging from 0 to 500Hz. It is suitable for various environmental conditions and is available in single, biaxial, or triaxial configurations.

Key Features:

High sensitivity and low noise, offering a higher dynamic range compared to standard AMS models.
Low impedance output with no need for signal conditioning in most applications.
Utilizes low-noise MEMS technology for micro-G range measurements.

Applications:

Temporary or quick vibration measurements.
Assessing disturbances to individuals.
Use in harsh environmental conditions.

Electronic Characteristics:

Number of axes: 1, 2, or 3 orthogonally oriented.
Full scale acceleration: ±3g or ±5g.
Output voltage: ±4.5 Volt differential.
Sensitivity: 1500 mV/g (3g model), 900 mV/g (5g model).
Frequency response: 0 - 500 Hz nominal, -3dB.
Operating voltage: +6 to +15 Vdc, 100 mA (triaxial model).
Output impedance: 90 Ohm.
Dynamic range: 120 dB typ (0-10Hz); 108.5dB (0-100Hz).
Noise density: 0.7 µg/√Hz typical (3g model).
Non-linearity: <0.3%.
Offset drift: ±0.3mg/°C (3g model), ±0.5mg/°C (5g model).
Full scale drift: 120 ppm/C°.
Sensor test: External test input, +/-0.25g 19Hz output.

Environmental Characteristics:

Operating temperature: -20 to +60°C.
Storage temperature: -40 to +90°C.
Shock survival: 1500.
Ambient pressure: 0 to 5 bar.
Humidity: 100%.

Physical Characteristics:

Weight: 800 g.
Dimensions: 60mm x 60mm x 60mm (without connectors).
Cabinet material: Anodized Aluminium.
Protection rating: IP65 with connector or IP68 with cable gland.
Electrical interface: 10 terminal pins CONNECTOR / cable gland.

Contact Information: For further inquiries, contact Solgeo at [email protected] or +39 035 4520075.

Catalog excerpts

AMS -PLUS SEISMIC ACCELEROMETER AMS-PLUS MEMS seismic accelerometer with high sensitivity suitable for any environmental condition and designed for the measurement and study of low intensity accelerations in the range 0-500Hz. AMS-PLUS models are high-sensitivity sensors designed for seismic purposes and for low-intensity, low-frequency motion studies. AMS-PLUS offer low noise and higher dynamic range respect to standard AMS. Accelerometers provide a high level, low impedance output. In most applications, no signal conditioning is required. These sensors use low-noise MEMS to provide low-frequency measurements in the micro-G range. It is available in single, biaxial or triaxial configuration. APPLICATIONS • Temporary or quick vibration measurements • Disturbance to the person • Hough environmental conditions Solgeo - Via Pastrengo, 9 - 24068 Seriate (BG, Ita

Open the catalog to page 1

AMS - PLUS SEISMIC ACCELEROMETER ELECTRONIC CHARACTERISTICS Number of axis Full scale acceleration (available ranges) Output voltage Frequency response Operating voltage Output impedance Dynamic range Noise density 0,7 µg/√Hz typical (3g model) Offset drift Full scale drift Sensor test External test input, +/-0,25g 19Hz output ENVIRONMENTAL CHARACTERISTICS Temperature operating Temperature storage Shock survival Ambient pressure Contact now your dedicated consultant: [email protected] +39 035 4520075 PHYSICAL CHARACTERISTICS Weight Dimension LxWxH Cabinet material Anodized Aluminium Protection...

Open the catalog to page 2

AMS-PLUS

AMS-PLUS

Catalog excerpts

All SOLGEO SRL catalogs and technical brochures