TPSB Series
6Pages

CENTRIFUGAL ROOF MOUNTED FANS TPSB Series Centrifugal roof mounted fans, low profile, horizontal discharge, backward blade impeller, with polyamide body, special weatherproof cowl and galvanized steel plate base. Dynamically balanced motor-roller assembly. Single-phase motor 230V - 50/60Hz, IP44, Class F (Class B model 190/060), grease ball bearings permanent and thermal protector. Includes IP65 remote terminal box. Flame proof terminal box Very accessible terminal box, made of V0 flameproof plastic, containing the capacitor. High efficiency, backward centrifugal blade impeller Low consumption and low maintenance. Patented design Great performance. TECHNICAL CHARACTERISTICS Before installation check that the product electrical characteristics listed on the data plate label (voltage, power, frequency, etc.) match those of the intended electrical supply. Maximum absorbed power (W) Maximum absorbed current at 230V (A) Sound pressure level* (dB(A)) Optional voltage regulator *Sound pressure level, measured at 3 meters, with the roof fan installed on a flat surface, working at points 2 of the characteristic curve. Roof mounted fans TPSB

CENTRIFUGAL ROOF MOUNTED FANS TPSB Series DIMENSIONS (mm) Model PERFORMANCE CURVES – qv: Airflow in m3/h. – psf: Static pressure in Pa. - SFP: Specific power factor, in W/m3/s (blue curves). – Dry air at 20ºC and 760 mmHg. – Performance data in accordance with ISO 5801 and AMCA 210-99 Standards. Power Spectra in dB (A) Duty point

CENTRIFUGAL ROOF MOUNTED FANS TPSB Series PERFORMANCE CURVES – qv: Airflow in m3/h. – psf: Static pressure in Pa. - SFP: Specific power factor, in W/m3/s (blue curves). – Dry air at 20ºC and 760 mmHg. – Performance data in accordance with ISO 5801 and AMCA 210-99 Standards. Power Spectra in dB (A) Duty point Power Spectra in dB (A) Duty point Roof mounted fans TPSB

CENTRIFUGAL ROOF MOUNTED FANS TPSB Series MOUNTING ACCESSORIES- INSTALLATION Sealing frame Flat roof insulated up stand Accessory adapater plate Backdraft shutter Flange with spigot Flexible coupllig Circular adapter Support base for inclined curb mounted installations MOUNTING ACCESSORIES JMS Sealing frame – For mounting a roof fan on an up stand or base. – Supplied with screws and gasket for a complete weatherproof seal. JPA Accessory adapter plate – Used when mounting the accessories (JCA, JBR, JAE). – Allows the fan to be disconnected from the upstand without having to remove the duct....

CENTRIFUGAL ROOF MOUNTED FANS TPSB Series ACCESORIOS DE MONTAJE JBR N Flange – For use when circular connection is required directly to the fan. – To be mounted at the fan inlet with the JPA plate or Cxed directly to the fan base (rivets or screws not supplied). JAE N Flexible coupling – Reduces the transmission of vibrations when the duct is connected directly to the fan. – To be mounted at the fan inlet with JPA plate. JCC Adapter for circular duct – For use when Ctting the models up to 400, directly to a spirally wound circular duct. BI Support base for inclined curb mounted...

CENTRIFUGAL ROOF MOUNTED FANS TPSB Series ELECTRICAL ACCESSORIES REB Electronic single phase speed controllers. RMB Single phase speed controller by auto-transformer. VAPZ Electronic single-phase regulators for single-phase fans 230V-50Hz. VRPZ Electronic control with display for single phase 230V-50/60Hz fans. Analogical input 0-10V or 4-20mA: The fan works proportionally to the input value with adjustments of the minimum and maximum values of the inputs and outputs. SCO2-A C02 and temperature sensor. SCO2-AD C02 and temperature sensor, with display. SCHT-AD C02, temperature and relative...