WP series

WP series

Product catalog summary
Overview: This document provides technical specifications and features of Solberg Manufacturing's Oil Mist Coalescing Elements and WP Media Elements. It highlights the efficiency, construction, and benefits of these elements.
Features:
  • Reinforced with epoxy-coated steel wire and expanded metal support on both sides of the media.
  • 0.3 micron media with 99.97% efficiency.
  • Continuous operating temperature range from 20°C (68°F) to 80°C (180°F).
Technical Specifications:
  • High efficiency at very low pressure drop.
  • Increased surface area allows for low velocity separation of ultra-fine oil mists.
  • High gravimetric efficiency results in low oil carryover.
  • Environmentally friendly sealing material.
Benefits: The elements are designed to provide high efficiency in oil mist separation with minimal environmental impact.
Replacement Element Sizes: Dimension tolerance is +6 mm.
Feature Identification:
  • M = Molded plastisol endcap
  • B = Endcaps have closed one end with bolt hole, open on other end
  • G = Galvanized metal endcaps
  • C = Closed one end, open on other end
  • D = Element with molded open end, metal closed
  • W = Wrapped coalescing media
  • P = Pleated coalescing media
See more

Catalog excerpts

WP series-1

Oil Mist Coalescing Elements/ WP Media Elements Features • Reinforced with epoxy coated steel wire • Expanded metal support on both sides of media Technical Specifications • 0.3 micron media; 99.97% efficiency • Continuous operating temp: 20°C (68°F) - 80°C (180°F) Benefits • High efficiency at very low pressure drop • Increased surface area in a given volume allows for low velocity separation of ultra-fine oil mists • High gravimetric efficiency means low oil carryover • Environmentally friendly sealing material Replacement Element Sizes Feature Identification M = Molded plastisol endcap B = Endcaps have closed one end with bolt hole, open on other end G = Galvanized metal endcaps C = Closed one end, open on other end D = Element with molded open end, metal closed W = Wrapped coalescing media P = Pleated coalescing media Dimension tolerance + 6 mm Note: Model offerings and design parameters may change without notice. See www.solbergmfg.com for most current offering.

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.