*mydirectindustry

SLCR-SLCRT

Product catalog summary

Overview: This document provides technical specifications and features of the SLCR/SLCRT Series Side Channel Blower Silencers, designed for noise reduction in various applications.

Specifications: The silencers are constructed from corrosion-resistant carbon steel and are available with a powder coat finish for sizes 1/2” to 1-1/2” and an epoxy coat finish for sizes 2” to 4”. They are designed to minimize pressure drop without the need for baffles or internal tubes. The maximum continuous operating temperature is 225°F (107°C).

Features: The silencers use layered sound absorbent media and are suitable for both inlet and discharge inline air service. They are available with various options including flange adapters, larger sizes, special connections, and high-temperature models.

Noise Attenuation: Noise reduction capabilities may vary depending on the specific application and equipment used. Users are advised to contact the manufacturer for typical noise attenuation data relevant to their application.

Product Range: The document lists various models with their respective sizes, types, SCFM ratings, and dimensions. Models range from 1/2" to 4" with different inlet/outlet configurations such as NPSC, FPT, and MPT.

Note: Model offerings and design parameters are subject to change without notice. For the most current offerings, users should refer to the manufacturer's website.

Catalog excerpts

Filter Silencers • Layered sound absorbent media • Designed for minimal pressure drop; baffles, internal tubes, and other restrictive devices are unnecessary • For inlet and discharge inline air service • Corrosion resistant carbon steel construction • Powder coat finish: 1/2" to 1-1/2" • Epoxy coat finish: 2" to 4" Technical Specifications • Max. temperature (continuous): 225°F (107°C) • Due to the wide range of equipment and environments; please contact factory for typical noise attenuation for your application. Options • Flange adapters • Larger sizes Special connections Hi-temp models Typical Noise Attenuation ♦ Noise attenuation may vary due to the wide range of applications and machines Note: Model offerings and design parameters may change without notice. See www.solbergmfg.com for most current offering. www.solbergmfg.com • [email protected] • Sales: 630.773.1363 • Fax: 630.7

Open the catalog to page 1

All SOLBERG Filtration catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list