Inlet Vacuum Filters
20Pages

Inlet Vacuum Filter Technical Data pg. 4-2 "L" Style Compact Vacuum Filters CSL Series 3/8" - 3", 18 - 300 SCFM pg. 4-4 ISO Flg CSL Series NW16-K100, 23-80 SCFM pg. 4-5 "L" Style Large Vacuum Filters CSL Series: 3" - 6" MPT, 300-1100 SCFM pg. 4-6 "T" Style Compact Vacuum Filters: CT Series: 1"- 6", 40-1100 SCFM pg. 4-8 ST Series: 1" - 4", 40-520 SCFM pg. 4-9 Extreme Duty SpinMeister™ Vacuum Filters STSML Series: 2" - 6", 40-900 SCFM pg. 4-10 Inlet Vacuum Filters See-Through Liquid Separators STS Series: 1" - 4", 40-500 SCFM pg. 4-11 Liquid Separator/Vacuum Filters LRS Series: 2" - 4"FPT, 60-830 SCFM pg. 4-12 Vapor Condensing Separator Traps JRS Series: 2" - 8" pg. 4-14 JST/JCT Series: 2" - 4" (Compact) pg. 4-15 Natural Gas Filtration Suction Scrubbers pg. 4-16 Vacuum Filtration for Solar, Semi-Con, LED, Coating RX Series: Reverse Pulse System pg. 4-17 Vacuum Filters for Medical Facilities HV Series: 2" - 4", 41-200 SCFM pg. 4-18 Pressure Drop Gauges pg. 4-19

Technical Data Inlet Vacuum Filters Applications & Equipment • Industrial & Severe Duty • Vacuum Pumps & Systems: Roots, Rotary Vane, Screw, Piston • Vacuum Packaging Equipment • Vacuum Furnace • Blowers: Side Channel & P.D. • Vacuum Lifters • Intake Suction Filters • Food Industry • Woodworking/Routers • Ash Handling • Printing Industry • Medical/Hospital • Remote Installations for Piston & Screw Compressors • Paper Processing • Waste Water Aeration • Cement Processing • Bag House Systems • Vacuum Vent Breathers • Chemical Processing • Factory Automation Equipment • Leak Detection Systems...

Technical Data Inlet Vacuum Filters A. Connec on & Airflow Known: When the connec on & airflow is known: 1. Select appropriate connec on style. (i.e.: MPT, Flange, NPSC, etc.) 2. Check assembly SCFM (flow) ra ng. Compare with your required airflow. (Note: Assembly flow ra ngs are based on 6,000 FPM or 30m/sec for a given connec on size to achieve low pressure drop performance. When required flow exceeds assembly flow ra ng, the pressure drop through the outlet connec on will increase. In such cases select by element SCFM (flow) ra ng.) 3. When required flow ra ng matches connec on size; skip to “C....

”L” Style Compact Vacuum Filters CSL Series 3/8” - 3” Config. E Inlet Vacuum Filters Features • Seamless drawn housings • O-ring seal • Corrosion resistant carbon steel construction • Powder coat finish • Stainless steel torsion clips for durability Technical Specifications • Vacuum Rating: Medium vacuum service** • Temp (continuous): min -15°F (-26°C) max 220°F (104°C) • Filter change out differential: 15-20" H2O over initial A P • Polyester: 99%+ removal efficiency standard to 5 micron • Paper: 99%+ removal efficiency standard to 2 micron ** See Vacuum Filter Technical Data for vacuum...

”L” Style Vacuum Filters ISO CSL Series NW16 - NW40 FLG ■ C Series Specific Applications • ISO flange connections - Stainless steel ISO flange - Buna o-ring sealed • Seamless drawn housings • Corrosive resistant carbon steel construction • Powder coat finish (Black models) • O-ring housing seal • Stainless steel torsion clips Technical Specifications • Vacuum Leak Rate: 1x10-5 mbar l/sec • Vacuum Rating: Medium vacuum service** • Temp (continuous): min -15°F (-26°C) max 220°F (104°C) • Filter change out differential: 15-20" H2O over initial A P • Polyester: 99%+ removal efficiency standard...

”L” Style Vacuum Filters CSL Series 3”-6”MPT,4”-12”FLG E Inlet Vacuum Filters • Heavy duty T bolts for easy maintenance • Corrosive resistant carbon steel construc on • Black powder coat finish • O-ring seal with U-channel groove • Inlet & outlet 1/4” gauge taps • Mount horizontally or inverted with “Stay in Place” o-ring u-channel groove • Low pressure drop construc on Technical Specifications • Vacuum Ra ng: Medium vacuum service** • Hydrosta cally tested to 0.5 bar pressure • Temp (con nuous): min -15°F (-26°C) max 220°F (104°C) • Filter change out differen al: 15-20” H2O over ini al Δ P •...

”L” Style Vacuum Filters CSL Series 3”-6”MPT,4”-12”FLGFlanged Assemblies Flange See Vacuum Filter Technical Data section for sizing guidelines. * Denotes 2 elements stacked in housing. O.D. O.D.: Outside Diameter B.C.: Bolt Circle B.H.: Bolt Hole All flanges are orientated "split center"'. Inlet Vacuum Filters MPT Assemblies MPT See Vacuum Filter Technical Data section for sizing guidelines. Note: Model offerings and design parameters may change without notice. See www.solbergmfg.com for most current offering. www.solbergmfg.com • sales@solbergmfg.com • Sales: 630.773.1363 • Fax: 630.773.1363

”T” Style Vacuum Filters CT Series 1” - 6” Inlet Vacuum Filters Features • Compact design for space restrictions; min. service area • Inlet above element for extended element life & maintenance intervals • Cast, corrosion resistant aluminum top with machined connections and integrated baffle design • 4 taps for mounting brackets: - 2", 2-1/2", 6" connections: M12x1.75 taps - 3" to 4" connections: 1/2"-13 taps • "T" style design minimizes piping requirements • Black powder coat carbon steel drop down bucket • Clip release shell for easy maintenance • Swing bolts standard on 6" housings •...

See-Through Vacuum Filters ST Series 1” - 4” Features • Compact design for space restrictions; min. service area • Inlet above element for extended element life & maintenance intervals • Cast, corrosion resistant aluminum top with machined connections and integrated baffle design • 4 taps for mounting brackets: - 2" to 2-1/2" connections: M12x1.75 taps - 3" to 4" connections: 1/2"-13 taps • "T" style design minimizes piping requirements • Bucket made from shatter resistant polycarbonate • Clip release shell for easy maintenance • Swing bolts standard on 6" housings • Drill points for...