”T” Style Vacuum Filters CT Series 1”-6” Inlet Vacuum Filters ATEX Available Features • Compact design for space restrictions; min. service area • Inlet above element for extended element life & maintenance intervals • Cast, corrosion resistant aluminum top with machined connections and integrated baffle design • 4 taps for mounting brackets: - 2", 2-1/2", 6" connections: M12xl.75 taps - 3" to 4" connections: 1/2"-13 taps • "T" style design minimizes piping requirements • Black powder coat carbon steel drop down bucket • Clip release shell for easy maintenance • Swing bolts standard on 6" housings • Drill points for additional taps: - 1", 1-1/4", 1-1/2", 3", 4" (gauge or bracket) • 1/4" FPT inlet/outlet taps for gauges: 2", 2-1/2", & 6" Technical Specifications • Vacuum Rating: Medium vacuum service** • Temp (continuous): min -15°F (-26°C) max 220°F (104°C) • Filter change out differential: 15-20" H2O over initial A P • Polyester: 99%+ removal efficiency standard to 5 micron • Paper: 99%+ removal efficiency standard to 2 micron ** See Vacuum Filter Technical Data for vacuum service data. • Swing bolts for heavy duty environments • Drain ports • Extended bucket (select models) • Various nonstandard finishes • Reverse pulse configuration Note: CT 2" & 2-1/2" models: Element seals on the base of the housing. See Vacuum Filter Technical Data section for sizing guidelines. Note: Model offerings and design parameters may change without notice. See www.solbergmfg.com for most current offering. www.solbergmfg.com • [email protected] • Sales: 63