”L” Style Vacuum Filters CSL Series 3”-6”MPT,4”-12”FLG Inlet Vacuum Filters Features • Heavy duty T bolts for easy maintenance • Corrosive resistant carbon steel construction • Black powder coat finish • O-ring seal with U-channel groove • Inlet & outlet 1/4" gauge taps Technical Specifications • Vacuum Rating: Medium vacuum service** • Hydrostatically tested to 0.5 bar pressure • Temp (continuous): min -15°F (-26°C) max 220°F (104°C) • Filter change out differential: 15-20" H2O over initial A P • Polyester: 99%+ removal efficiency standard to 5 micron • Paper: 99%+ removal efficiency standard to 2 micron ** See Vacuum Filter Technical Data for vacuum service data. Benefits • Mount horizontally or inverted with "Stay in Place" o-ring u-channel groove • Low pressure drop construction • Straight-through configurations • Various filter media • Stainless steel • Various nonstandard finishes and connection styles • ISO Flange (contact factory for specs, sizes & availability) • Flange faces free of paint • Internal surfaces free of paint • Lifting lugs • Brackets for optional support legs • Mounting housing bands • Nameplate bracket www.solbergmfg.com • [email protected]

”L” Style Vacuum Filters CSL Series 3”-6”MPT,4”-12”FLGFlanged Assemblies Flange See Vacuum Filter Technical Data section for sizing guidelines. * Denotes 2 elements stacked in housing. O.D. B.H. O.D.: Outside Diameter B.C.: Bolt Circle B.H.: Bolt Hole All flanges are orientated "split center"'. Inlet Vacuum Filters MPT Assemblies MPT See Vacuum Filter Technical Data section for sizing guidelines. Note: Model offerings and design parameters may change without notice. See www.solbergmfg.com for most current offering. www.solbergmfg.com • [email protected] • Sales: 630.773.1363 • Fax: 630.773.1363...