PROTOCOL INTERFACE MODULE (PIM)
9Pages

ULTRA PRECISION TECHNOLOGIES Solartron Metrology Precision Driven Connect Solartron’s Orbit® Network to the world’s leading PLC protocols Etheri WIP BB0BO SWBsSa EtherCAf Modbus DESCRIPTION Solartron Metrology’s Protocol Interface Module (PIM) provides a simple way of interfacing the Orbit® Digital Measuring Network to most Programmable Logic Controllers (PLCs). A distinct PIM is created for each protocol, including: > Ethernet/IP™ > ProfiNet ™ > EtherCat ™ > Modbus TCP > MODBUS RTU (RS485 Serial) can be interfaced using Solartron’s standard MODIM Interface. (PSIM required) The PIM includes the following features: > Communicate with up to 150 Orbit modules with Explicit Messaging or 50 with Cyclic Messaging > Power up to 10 Orbit modules (depending on type). (A PSIM can be used when more than 10 is required) > Connect any Solartron Digital sensor including lasers > Connect 3rd party sensors via the Analog Interface Module (AIM) > Set up via free software interface

Solartron Metrology VMETEK ULTRA PRECISION TECHNOLOGIES PIM PLC Interface to Orbit PLC General Protocol Specifications Explicit and Cyclic Messaging Supported 125 word read and write data length Ethen 'et/IP > One of the primary connectivity tools to different Rockwell Automation platforms, or any other PC’s that support EtherNet/IP™ > Explicit Messaging aspect of the protocol has been implemented for reading and setting individual parameters, > Cyclic messaging has been implemented to facilitate synchronised readings > Ethernet I/P Server Mode: In server mode, the module accepts commands...

AMETEK ULTRA PRECISION TECHNOLOGIES PIM PLC Interface to Orbit (cont.) / i Solartron •/ Metrology Precision Driven amSaa > One of the primary connectivity tools to different Siemens platforms or any other devices that support ProfiNet®. > The Explicit Messaging aspect of the protocol has been implemented for reading and setting individual parameters, cyclic messaging has been implemented to facilitate synchronised readings EtherCAf ^ > EtherCAT is the open real-time Ethernet network originally developed by Beckhoff. > The EtherCAT variant of the PIM provides both Explicit and Implicit data...

Solartron Metrology Precision Driven > Download Orbit Support Pack for Windows > Stack Orbit Modules to PIM > Plug PIM to Comuter using MicroUSB to USB Cord (Included) > Set up Orbit and Protocol Parameters Configure output to PLC > Set EtherNet/IP™ , PROFINET®, EtherCat settings such as DHCP enable, host name, IP address, subnet mask and default gateway. > For PROFINET this can also be done through the standard PROFINET methods - TIA portal, Pronetta). > The configuration application is also used to set Modbus settings such as baud rate, parity, Modbus address etc. Configure Solartron...

AMETEK ULTRA PRECISION TECHNOLOGIES Solartron Metrology Precision DrivenSample Application Inline Flatness check www.solartronmetrology.com • sales.solartronmetrology@ametek.com EDCR number: 20860 Issue number: 2 Datasheet number: 503178

ULTRA PRECISION TECHNOLOGIES Solartron Metrology Precision Driven Sample Application Pim being used with 2 digital probes to measure diameter and an AIM module to check ambient temperature www.solartronmetrology.com • sales.solartronmetrology@ametek.com EDCR number: 20860 Issue number: 2 Datasheet number: 503178

Solartron Metrology Precision Driven Product Environmental Sealing Storage Temperature (°C) Operating Temperature (°C) EMC Emissions EMC Immunity EMC Immunity Shock Material PIM Interface Protocol Messaging Types Ethernet/IP Server Specifications Connections CIP Services Supported Reading Rate (Readings per second) Power (input) No of Orbit Modules (powered) No of Orbit Modules using additonal Power Supply Display Electrical Interface Ethernet/IP IP43 0 to +60 +5 to +60 EN61000-6-3 EN61000-6-2 EN 61326-1:2013 Do not subject to excessive shocks or loads ABS, Nylon, Acrylic Ethernet/IP...

Solartron Metrology Precision Driven AMETEK ULTRA PRECISION TECHNOLOGIES Accessories +24V Power Block with Mains leads. Available with UK, EU and US plugs Spare T-con Mounts Spare Earthing/Mounting brackets Note: MODIM dimensions are the same as a Standard PIE module (see catalogue) DIGITAL NETWORK The Solartron Orbit® 3 Digital Measurement System, in conjunction with Solartron’s wide range of transducers, provides a limitless set of measuring system solutions, with numerous different interfaces to computers and PLC’s, making Orbit® 3 completely flexible. Compatible products include both...

ULTRA PRECISION TECHNOLOGIES Solartron Metrology Sales Offices UK (Headquarters and Factory) Solartron Metrology Bognor Regis. West Sussex. P022 9ST Tel +44 (0) 1243 833 333 Fax. +44 (0) 1243 833 332 Email: sales solartronmetrologyaameiek.com AMETEK Commercial Enterprise (Shanghai) Co. Ltd Shanghai. 200131, China Tel *86 21 5763 2509 Email: chlnaiolartronmetrologyaametek com Solartron Metrology USA Central Sales Office Gastonia. NC 28054 Tel: +1800 873 5838 Email usasales.sotartronmetrologypametek.ccKn AMETEK GmbH Solartron Metrology Division 40670 Meerbusch Tet +49 (0) 2159 9136 500 Fax:...