Catalogs >
Solartron Analytical >
modulab_xm_electronic_materials

modulab_xm_electronic_materials
2Pages

Catalog excerpts

Electronic Materials Displays | Solar/PVs | Semiconductors | Nanomaterials LED, LCD, OLED, MEMs, Perovskite materials OPV, Si, DSSC, OFET, Ge, GaAs electronic materials the XF71 difference $ Market leading impedance analysis Widest voltage and current range available Time domain and impedance analysis in a single system ModuLab® XM MTS is the only electronic materials test system that combines an accurate time domain analyzer and a high performance impedance analyzer into a single “plug and play” modular chassis. Purpose built for electronic materials research the ModuLab XM provides: High-performance impedance analysis throughout the entire frequency range and across all three modes of operation •4 Swept sine (highest accuracy and repeatability) •0 Multi-sine/FFT (for increased test throughput especially at low frequency) •6 Harmonic analysis (to study non-linear materials) •4 100 V option module enables tests of operating range and linearity/breakdown properties of materials Low frequency <10 Hz impedance/C-V measurements for material purity and degradation studies •£ Multi-component system calibration for ensured measurement accuracy •£ Market leading frequency range and resolution for analysis of carrier mobility/concentration (1 in 65,000,000) •£ Staircase or smooth ‘analog’ ramp waveforms. Important for I-V, hysteresis and polarization measurements. •4 Wide current measurement range (over 16 decades of current from 0.1 fA to 2 A) needed for electronic materials that transition between conduction states depending on applied voltage •4 All time domain techniques (fast pulse, I-V etc.) use the same ‘core’ hardware module ensuring minimum cabling to the sample and consistency of results •£ Available voltage and current amplification modules (100 V amplifier, femto ammeter, 2A booster) for the greatest flexibility in application •£ XM hardware and software is compatible with highly efficient, low cryogen usage cryostats and probe stations •4 User friendly software with simple three step test setup/run, built-in live waveform displays, connection diagrams and equivalent circuit/ IV fit functions. •S Compatibility with potentiostat modules for Dye-Sensitized Solar Cells (DSSC)

Open the catalog to page 1

Accessories Probe stations The ModuLab XM is fully compatible with a wide range of cryogenic and noncryogenic probe stations that operate from 5K to 475K XM provides full time domain and AC test capability via probe stations 2 or 4 terminal connections available for high and low impedance samples General software facilities Manual or remote controlled X, Y, Z probe positioning Sample in static gas (no sample cracking) Very low cryogen usage (typically 250 ml/hr @ 77 K) Operation to 78K with LN2, 5K with LHe Switching between LHe/LN2 operation per experiment. High Voltage Amplifiers ModuLab...

Open the catalog to page 2