M series STANDARD PILOT STERILIZABLE IN PLACE SOLUTIONS
6Pages

{{requestButtons}}

Catalog excerpts

M series STANDARD PILOT STERILIZABLE IN PLACE SOLUTIONS - 1

M series STANDARD PILOT STERILIZABLE IN PLACE SOLUTIONS

Open the catalog to page 1
M series STANDARD PILOT STERILIZABLE IN PLACE SOLUTIONS - 2

•J>SOLARIS BIOTECH SOLUTIONS M series bioreactors and fermenters are Solaris' "standard" pilot plant scale platforms. There are 6 available standard vessel sizes ranging from 30 up to 200 L total volumes, completely configurable with an extensive range of options and accessories. M Series typical applications includes the following: Scale-up and scale-down studies Pilot plant Small productions M series can be used for: Biopharmaceutical Biofuels Food industry Bioremediation Bioplastic Cosmeceutical Nutraceutical M Series your scaling up guide

Open the catalog to page 2
M series STANDARD PILOT STERILIZABLE IN PLACE SOLUTIONS - 3

TK connection rather than TC ensures a better cleanibility and easier sterilization Re-sterilizable addition system (steam bridge) Different gas mixing strategies with up to 5 TMFC Automatic mechanical seal lubrication with steam condensate loop 19’’ coloured touch screen industrial HMI SBC16: smart controller designed to provide an high level of automated management of the fermentation/ cultivation processes Customizable PID or factory default Multiple sensors options pH, dO2, Redox, Total Cell density, Viable Cell density, Conductivity,dCO2 Double jacket (side/bottom) Increased heat...

Open the catalog to page 3
M series STANDARD PILOT STERILIZABLE IN PLACE SOLUTIONS - 4

M SERIES Modbus Digital sensors Why a digital sensor? Digital sensors (including Cell Density products) have been integrated to the Solaris PCS and Leonardo controlling software, giving the user many benefits over traditional analog sensor outputs. Such benefits include a robust communication protocol not susceptible to signal loss, in-software sensor diagnostic information, parallel calibration/batch calibrations and more. Sensor life traceability Hardware and software adaptability are key to enable the best aeration strategy for each process. Thermal mass flow controllers (TMFC) allow...

Open the catalog to page 4
M series STANDARD PILOT STERILIZABLE IN PLACE SOLUTIONS - 5

Data sheet Controls Set up your M series Cell density Total cell density based on turbidity (Two ranges: 10A5 to 10A8 mammalian cells/ml - 0.5 to 100 g/L dry weight) Options Double mechanical seal Vessel empty sterilization Electrical heaters Resterilizable addition system: Steam bridge (manual or automatic) Peristaltic pumps (WM 114, WM 313, WM 520) Gravimetric flow control (feed rate controlled through weight measurement) Manual and automatic SIP harvest and sampling valves CIP system: removable spray balls or integrated system (recirculating pump and n.2 removable spray balls + software...

Open the catalog to page 5
M series STANDARD PILOT STERILIZABLE IN PLACE SOLUTIONS - 6

SOLARIS BIOTECHNOLOGY srl Via Bachelet, 58 - 46047 Porto Mantovano Mantova - Italy Phone: +39 0376 408760 Fax: +39 0376 385108 Email: info@solarisbiotech.com www.solarisbiotech.com

Open the catalog to page 6

All SOLARIS a donaldson brand catalogs and technical brochures

  1. JUPITER

    5 Pages

  2. M SERIES

    6 Pages

  3. IO

    5 Pages

  4. S-I SERIES

    7 Pages

Archived catalogs

  1. ELARA ST

    6 Pages

  2. ELARA FLAT

    6 Pages

  3. S & I series

    11 Pages

  4. Venus

    7 Pages

  5. IO 2018

    6 Pages

  6. Kronos

    8 Pages

  7. ESEDRA

    3 Pages

  8. GENESIS

    4 Pages