video corpo

C85

C85

Product catalog summary
Materials
Impeller: 15-5 PH
Casing: ASTM A216 GR WCC
Diaphragm/Guide Vane: ASTM A36
Rotor Spacer: AISI 410
Stub Shafts: AISI 4140
Labyrinth Seals: Steel-backed Babbitt
Key Features
Number of Stages: 1 - 2
Seals: Tandem dry gas
Bearings: Journal - Tilting-pad; Thrust - Self-equalizing, tilting-pad
Inlet/Discharge Flanges: 42/42 in. Class 900
Efficiency: Greater than 89% isentropic
Maximum Speed: 7000 rpm
Maximum Flow: 1274 m3/min (45,000 acfm)
Maximum Total Head: 108 kJ/kg (36,000 ft-lbf/lbm)
Maximum Casing Pressure: 11 030 kPag (1600 psig)
Maximum Torque: 79 090 Nm (700,000 lbf-in.)
Instrumentation
Fully instrumented with vibration, temperature, and pressure monitoring per API 617
Vibration Limits: Within API 617
Typical Weights and Dimensions
Length: 3.2 m (10' 8")
Height: 3.0 m (9' 10")
Width: 3.8 m (12' 4")
Weight: 72 575 - 77 111 kg (160,000 - 170,000 lb)
Operation Range (Pressure vs. Flow)
Graph data indicates a range of discharge pressures from 290 to 1740 psi with corresponding inlet flow rates from 3531 to 353,145 acfm.
Applications
Oil and Gas Applications
Pipeline Gas Compressors
Additional Information
The Solar® C85 gas compressor is designed for use with the Titan™ 250 gas turbine, offering high efficiency and a wide flow range. It is built to withstand severe environments and operating conditions, complying with API 617 standards. Over 5000 compressors have been built and installed, showcasing reliability and advanced technology.
Contact Information
Telephone: (+1) 619-544-5352
Internet: www.solarturbines.com
Address: Solar Turbines Incorporated, P.O. Box 85376, San Diego, CA 92186-5376 U.S.A.
Trademarks
Caterpillar is a trademark of Caterpillar Inc. Solar and Titan are trademarks of Solar Turbines Incorporated.
Note
Specifications are subject to change without notice. Printed in U.S.A. © 2009 Solar Turbines Incorporated. All rights reserved.
See more

Catalog excerpts

C85-1

Pipeline Gas Compressors Oil and Gas Applications The Solar ® C85 gas compressor is designed for applications with the Titan™ 250 gas turbine. This compressor combines high efficiency and wide flow range with a robust design and ease of restaging. The C85 gas compressors have the latest state-of-the-art technology combined with the experience and reliability that comes with building and installing over 5000 compressors. These compressors are designed in compliance with API 617, a requirement for the severe environments and operating conditions this equipment may encounter. Key Features Number of Stages Journal: Tilting-pad Thrust: Self-equalizing, tilting-pad Inlet/Discharge Flanges Maximum Speed Maximum Flow Maximum Total Head Maximum Casing Press. Maximum Torque Fully instrumented with vibration, temperature, and pressure monitoring per API 617 Vibration Limits Materials Impeller Rotor Spacer Stub Shafts Labyrinth Seals Steel-backed Babbitt Typical Weights and Dimensions Length Solar Turbines Incorporated P.O. Box 85376 San Diego, CA 92186-5376 U.S.A. Caterpillar is a trademark of Caterpillar Inc. Solar and Titan are trademarks of Solar Turbines Incorporated. Specifications subject to change without notice. Printed in U.S.A. © 2009 Solar Turbines Incorporated. All rights reserved. DSC85PL/1109/EO DISCHARGE PRESSURE kPag (psia) Telephone: (+1) 619-544-5352 Internet: www.solarturbines.com

 Open the catalog to page 1

All Solar Turbines catalogs and technical brochures

  1. C33

    1  Page

  2. C16

    1  Page

  3. C45

    1  Page

  4. C50

    1  Page

  5. C61

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.