*mydirectindustry

SH module

Product catalog summary

Overview: This document provides technical specifications for the SH series hydromill modules, specifically models SH-25, SH-35, and SH-40. It includes details on dimensions, operational capabilities, and suitable applications for different soil and rock conditions.

Specifications:

Module Height: SH-25: 5.2 m (17 ft), SH-35: 10.8 m (35 ft), SH-40: 13.3 m (44 ft).
Trench Length Range: All models: 2800 mm (110 in) to 3200 mm (126 in).
Trench Width Range: SH-25 and SH-35: 650 to 1500 mm (26 to 59 in), SH-40: 800 to 2000 mm (32 to 79 in).
Weight Range: SH-25: 20 to 30 t, SH-35: 30 to 40 t, SH-40: 40 to 50 t.
Torque Range: SH-25 and SH-35: 110 kNm, SH-40: 110 to 130 kNm.
Drilling Speed: 25 rpm for all models.
Flow Rate: 450 m³/h for all models.
Delivery Pipe Diameter: 152 mm (6 in) for all models.
Hydromill Module Rotation: SH-25 and SH-35: +/- 90°, SH-40: -45° to +90°.

Cutting Drums:

Standard Teeth Drums: Suitable for coarse and cohesive soil, alluvial soil with small soft rock boulders, and medium-soft decompressed rocks (UCS < 20 MPa).
HD Teeth Drums: For mixed soils and medium decompressed rocks (UCS up to 30 MPa).
Standard Pick Drums: For mixed soils with boulders and medium-hard decompressed rocks (20-50 MPa UCS).
Auger Pick Drums: For low fractured medium and hard rock formations (30-50 MPa UCS).
HD Pick Drums: For not fractured hard-extremely hard rock formations (UCS > 50 MPa).

Cutting Motors: The document lists various motor models (HH-13, HH-11, HH2-9, HH3-8) with corresponding torque and speed specifications.

Additional Information: The document notes that all technical data are indicative and subject to change without notice. It also emphasizes that the drawings are not to scale.

Disclaimer: The brochure is distributed by SOILMEC Spa and should not be reproduced without authorization. The complete network list is available on their website.

Catalog excerpts

Module data sheet Module SH-25 indipendent flaps hydromill module indipendent flaps cutting drums Drawing are not to scale All technical data are purely indicative and subject to change without notice cutting motors

Open the catalog to page 2

Standard Teeth Drums Standard Teeth Drums Coarse and cohesive soil, alluvial soil with small size of soft rocks boulders, medium-soft decompressed rocks Module Type Module height (H) Trench length range Trench width range Weight range Indipendent mobile flaps Cutting motors Torque range Drilling speed Flow rate Delivery pipe Hydromill module rotation HD Teeth Drums Mixed soils, fractured and medium decompressed rocks Standard Pick Drums Standard Pick Drums Mixed soils with boulders, fractured and medium-hard decompressed rocks (20-50 MPa UCS) Auger Pick Drums Auger Pick Drums Low fractured mediumand...

Open the catalog to page 3

This brochure has been edited and distributed by SOILMEC Spa. The present document cancels and override any previous ones. This brochure shall not be distributed, reproduced or exhibited without SOILMEC Spa. authorization in accordance with to SOILMEC web site disclaimer condition. SOILMEC Spa distributes machinery and structures all over the world, supported by SOILMEC Spa subsidiary companies and dealers. The complete Soilmec network list is available on the web site www. soilmec.it Technical data sheet SH module Hydromill- EN - 001- 06/2025

Open the catalog to page 5

All SOILMEC S.P.A. catalogs and technical brochures

SM-11 MICROPILES
12 Pages
SM-4 MICROPILES
8 Pages
SR-65
20 Pages
SC-135 TIGER
20 Pages

Archived catalogs

Hydromill
20 Pages
Microdrilling
20 Pages
Cranes
24 Pages
Piling rig
32 Pages
Soilmec Company Profile
20 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list