SCB-PB Basic version pneumatic control module
1Pages

SCB-PB Basic version pneumatic control moduleI Product introduction SCB-PB Basic version pneumatic control module is a special pneumatic drive controller for SRT flexible end fixture. It can output adjustable air pressure of - 60~100kPa. Under the trigger of external equipment, it drives the flexible end fixture to perform opening and gripping actions. Positive pressure output corresponds to the gripping action of the fixture, and negative pressure output corresponds to the opening action of the fixture. The controller can be conveniently matched with flexible end clamps and other automatic equipment to form a flexible grasping system. I _ I Real time status display f&S Manual voltage regulation /ttn. Accurate and high-w speed responsejQ| Fault alarm function Equipped with pressure display and indicator light: the pressure display can display the real-time air pressure value and set air pressure at the air pressure output port, and the indicator light can display the current working state of the controller. The adjustment knob is equipped to adjust the set pressure of grasping and opening respectively, which is convenient and simple and saves time. By optimizing the control system of the old controller, the output air pressure can be more accurately adjusted to reach the set output air pressure value in a short time to meet the requirements of certain specific working environments. The output air pressure is detected in real time. When the air leakage of the end fixture is detected, the indicator light will turn red, and the control system will output signals to facilitate the operator or external control system to make judgments and improve the reliability of the production line. I Structural dimensions ■ Technical parameter ■ Electrical port Dimensions/mm