UNIPLAN TRIPLE ACTIONOGENERAL INFORMATION • One products - three uses: Undercoat - Filler - Finishing • Bright white - High opacity - Deep matt • Difficult to scratch • Interior: Use on carefully jointed and smoothed plasterboard • Does not mask tannin leaks • Surfaces must be clean, dry, sound, and contain between 6 and 16% humidity. ^Advantages • Three actions in two coats: Undercoat, Filler and Finishing • Highly attractive smooth finish • Needs no further smoothing • Easy to sand ^APPLICATION • Airless Pump: Recommended tip 627 with special filler pump • The less powerful the pump, the smaller the tip • For optimum results, apply this method: ◦ Spray a first coat of filler of around 300-400 g/m2, which will reveal imperfections and serve as an undercoat. ◦ The carefully smooth the surface. ◦ After drying, sand and remove any dust. ◦ Lastly spray the final coat using 1.2 kg/m2 at a distance of 80 cm from the surface. Needs no further smoothing. • Surfaces must be prepared according to French DTU standards. ^COVERAGE: From 1.2 kg to 1.5 kg /m2 ^PACKAGING: 25 kg container OSHELF LIFE: 18 months in unopened container. Keep from freezing.