ENDUIT AIRLESS BANDESOGENERAL INFORMATION • Plasterboard Jointing Tape System • Manual or Airless use • Ready-to-use paste filler • Bright white, matt, smooth finish • Odourless • Clean all equipment with water • For interior use on plasterboard joints, without dilution or mixing • Surfaces should be dry, clean and sound. ^Advantages • Very high adhesion • Very smooth application • Manual or Airless use • Easy to sand ^APPLICATION • For use at temperatures above 5°C. • For use with all types of machines designed for spray-on application, on plasterboard for joint tape bonding. • Spray horizontally at 20 to 30 cm from the surface. Recommended tips 527 to 531, pressure 140-150 bar. • After an initial vertical spray application along the plasterboard recesses, apply and compress the joint tape on the filler using a coating knife. To avoid air bubbles, do not exert excessive pressure when compressing the tape. • After drying, apply a second coat and carefully smooth down with a finishing trowel. OCOVERAGE: Filling and levelling: approx. 400 g per linear metre ODRYING TIME: 6 to 24 hours depending on the temperature, humidity and ventilation of the room. ^PACKAGING: 25 kg Bag or Container. OSHELF LIFE: 18 months in unopened container. Keep from freezing.