7766 Floor scale
12Pages

Catalog excerpts

Weighing platform made from painted steel Screw-mounted plate Load acceptance iaw. DIN 8119-4, control load 2 Suited for installation at level ground or for freestanding setup Inclusive stainless steel terminal 3010

Open the catalog to page 1

Features Weighing platform 2823 Approvable class III Painted steel weighing platform Bolted platform Nickel-plated steel load cell, protection class IP 67 Stainless steel terminal box, protection class IP 65 Load acceptance according to DIN 8119-4, standard load 2 Suitable for installation flush with the floor or for free-standing installation Measuring cable length 6 m (other cable lengths on request) Optionally with plug-in connection to the terminal Terminal 3010 Compact housing made of stainless steel 1.4301, protection class IP 67 Integrated power supply 100-240 V, 50 / 60 Hz Optional:...

Open the catalog to page 2

Products Order number Variation

Open the catalog to page 3

Accessories Order number Variation Assembly kit for securing freestanding version (2 kits needed per weighing platform) (2 each foot plates, screws, pins and washers, all platform sizes, up to 3,500 kg load capacity) Assembly kit for securing freestanding version (2 kits needed per weighing platform) (2 each foot plates, screws, pins and washers, platform 2,000 x 1,500 mm, up to 7,500 kg load capacity) Assembly installation frame, painted, for platform 1,000 x 800 mm, for 1.5 t load capacity Assembly installation frame, painted, for platform 1,250 x 1,000 mm, for 3.5 t load capacity...

Open the catalog to page 4

Accessories Order number Variation Drive-on ramp, smooth 1,000 x 1,250 x 80 mm, painted, for platform 1,500 x 1,250 mm Drive-on ramp, smooth 1,000 x 1,500 x 80 mm, painted, for platform 1,500 x 1,500 mm Drive-on ramp, smooth 1,000 x 1,500 x 100 mm, painted, for platform 2,000 x 1,500 mm Drive-on ramp, smooth 1,200 x 1,500 x 130 mm, painted, light gray, for platform 2,000 x 1,500 mm, for 7.5 t load capacity Drive-on ramp, smooth 1,000 x 800 x 80 mm, 1.4301 stainless steel, for platform 1,000 x 800 mm Drive-on ramp, smooth 1,000 x 1,000 x 80 mm, 1.4301 stainless steel, for platform 1,250 x...

Open the catalog to page 5

Accessories Order number Variation Base frame for pallet truck transport, painted, 4 adjustable feet, spirit level, 1,500 x 1,250 mm Base frame for pallet truck transport, painted, 4 adjustable feet, spirit level, 1,500 x 1,500 mm Base frame for pallet truck transport, painted, 4 adjustable feet, spirit level, 2,000 x 1,500 mm Base frame for pallet truck transport, stainless steel, 4 adjustable feet, spirit level, 1,000 x 800 mm Base frame for pallet truck transport, stainless steel, 4 adjustable feet, spirit level, 1,250 x 1,000 mm Base frame for pallet truck transport, stainless steel, 4...

Open the catalog to page 6

Accessories Order number Variation Base frame for forklift transport, stainless steel, 4 adjustable feet, spirit level, 1,500 x 1,500 mm Base frame for forklift transport, stainless steel, 4 adjustable feet, spirit level, 2,000 x 1,500 mm Assembly plate versions for ramps, drive-on side, up to 1,500 mm (version in V4A on request) Terminal box in protection class IP 68, potted Identchip in terminal box with 10 m cable (When ordering in combination with a weighing platform 2816, 2817, 2818, 2823, 2814, 2825, 2815) Wall / stand bracket 30xx, stainless steel (required for table and floor stand)...

Open the catalog to page 7

Accessories Order number Variation Plug-in connection with ID chip installed, approvable section point between scale and display, e.g. for in-ground installation Plug-in connection with ID chip, straight plug D=20 mm installed, approvable section point between scale and display Data cable, 9 pin connection 30xx – PC, cable length 2 m Data cable, 9 pin connection 30xx – PC, cable length 2–10 m USB data cable, connector 30xx – PC, cable length 2 m Ethernet interface installed incl. 10m patch cable Ethernet interface as installation kit, incl. 10 m patch cable RS422/RS485 interface module...

Open the catalog to page 8

Accessories Order number Variation Analog interface installed Analog interface as installation kit Profinet (2-ports), installed incl. module Profinet (2-ports), as installation kit incl. module WLAN module configured incl. internal antenna, installed WLAN module configured incl. internal antenna, as installation kit Bluetooth® interface incl. internal antenna installed Bluetooth® interface incl. internal antenna as installation kit Data cable for scanner / Precisa / printer 2795.20, cable length: 2 m Measuring point installed Measuring point as installation kit I/O module relay, as...

Open the catalog to page 9

Accessories Order number Variation I/O module PNP, installed with cable fitting CD PC service software for print format design, dataset, printer installation PC software Scale Connecting, software for transferring scale data to PC-based software Scale Connecting Plus, extensive software for transferring scale data to PC-based software (with activation code) Software for linking scale to SAP R/3, to link scale via RS232, USB or Ethernet Keyboard wedge USB, for RS232 scale interface to PC USB interface (data cable 2550.03.002 required) Large display LED 95 mm, 5 pin plug with 10 m cable...

Open the catalog to page 10

Accessories Order number Variation Tape printer, paper width up to 76 mm (9 pin), RS 232 Printer cable 25 pin for printer 2795.14 and 12.001, cable length 2 m Printer cable 25 pin for printer 2795.14 and 12.001, cable length 2–10 m Portable scanner, wire connection, incl. bench stand bracket and power supply Wireless portable scanner Bluetooth, incl. rechargeable battery, base station, RS 232 cable and power supply Print format design, customer-specific Dataset format, customer-specific Dataset/print format installation of existing or provided data Relay box (I/O module required) 2 outputs...

Open the catalog to page 11