Catalogs >
Sodick >
VZ300L/VZ500L

VZ300L/VZ500L
6Pages

Catalog excerpts

Drain 1B (H=45) 850 200 Deionizer Cooling Unit VZ300L VZ500L Linear motor drive precision Wire-cut EDM

High Value Standard Sodick’s expertise in EDM innovation using 3D design systems, the latest CAE technologies and numerous simulations have made it possible to create an improved basic machine structure of optimised rib arrangements which increase rigidity by approximately 70%. Thanks to its innovative design, machine deformation is minimised, allowing optimum performance of high-speed and rapid acceleration linear motors. Furthermore the original design of an independent X and Y-axis plus an efficient machine layout leads to a longer stroke, smaller footprint and highly accurate machining...

Open the catalog to page 2

Core Technologies For Outstanding Performance In-house Developed Linear Motor Drive Sodick’s in-house developed linear motor is a direct drive, vibration free device which has unrivalled acceleration and positioning accuracy with no backlash. It’s high dynamic responsiveness, stability for precision machining, and performance do not diminish over time and remain maintenance free. The linear motor achieves even better performance thanks to the Motion Controller (K-SMC) which Sodick has perfected over the years. Wire Workpiece Motor Driver Wire Workpiece Linear Scale Motor Linear Motor Sodick...

Open the catalog to page 3

Ceramic Components Sodick's VZ range is constructed using ceramic components for the work stand table and critical parts, all of which are built in-house to ensure high precision machining with better electrical insulation, abrasion resistance and rigidity. Ceramics are ideal for high precision machining due to their very low thermal expansion coefficient (less than one third than that of cast iron), high rigidity and resistance to ageing. Heart NC for 2D Form Designing Heart NC on-board programming software with CAD file (DXF) import capability is standard on VZ series. Varying top &...

Open the catalog to page 4

Energy Saving Designs And Technologies Compared with conventional EDMs, the Sodick Wire-Cut EDM Range can reduce the average energy consumption by up to 60%. The newly developed power unit “LN2W” series efficiently supplies discharge energy and linear motor control current through the resistor free circuit. Furthermore the energy used in the manufacture of the actual component parts is dramatically reduced as the linear motor drive systems require fewer mechanical components and do not need to be replaced regularly due to wear.

Open the catalog to page 5

Cooling Unit Controller Jumbo Feeder (Option) Stand Base to Upper Guide Stand Base to Upper Guide Cooling Unit Cooling Unit Wire Bucket Side View Front View · All CE spec machines have external transformer with dimension of ca. 650 x 460 x 540mm Machine Tool Max. workpiece dimensions (W×D×H) Taper angle (at workpiece thickness of 120mm) U axis × V axis travel Work tank dimensions (W×D) Wire bobbin weight Flushing / Submerged Distance from floor to table top Flushing / Submerged Machining method Wire tension Wire feed speed (max.) Wire diameter Machine installation space (W×D) Machine weight...

Open the catalog to page 6