HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS AND ATEX FANS FOR EXPLOSIVE ATMOSPHERES
216Pages

INDUSTRIAL APPLICATIONS ATEX EXPLOSIVE ATMOSPHERES CHEMICAL INDUSTRY HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS AND ATEX FANS FOR EXPLOSIVE ATMOSPHERES ATEX 94/9/CE MINING AND PUBLIC WORKS

Sodeca has begun a new stage of study and design of new trends in ventilation which will help to preserve the environment and to make the energy saving which so much concerns today’s society. SODECA has concentrated its activity on the production of industrial fans, ventilation systems and extractors for the removal of smoke in case of fire since 1983, when it was founded. SODECA’s fans and extractors are present in all European countries and in many parts of the world, thanks to the quality of the product and the methods of research and development used. Our quality procedures, used and...

ATEX EXPLOSIVE ATMOSPHERES All SODECA fans and extractors for explosive atmospheres comply with the requirements of the European Directive 94/9/EC and have been designed to comply with the EN-14986 Standard “Fan design for working in potentially explosive atmospheres”. Product quality is thus guaranteed, and maximum safety levels are ensured for people and facilities. CERTIFICATES ATEX EXPLOSIVE ATMOSPHERES Fan Design: In compliance with the EN-14986 standard, and to prevent ignition in the event of friction or impact between the mobile and static parts, they are manufactured using...

Extractors for ATEX EXPLOSIVE ATMOSPHERESAn ATEX zone has a a mixture of air with flammable gas, vapour, mist and/or powder, which if it caught fire would all burn immediately. Flame and explosion limits for gases: LEL Lower Explosive Limit » % volume. LEL Upper Explosive Limit » % volume. MIE Minimum ignition energy » 10-6 g Joules Flash Point Lowest temperature at which vapours of a fluid will ignite Autoignition Temperature at which a gas spontaneously ignites Temperature (T1, T2, T3, T4, T5 and T6) Flammability of solids: LEL or MEC Minimum Explosible Concentration (MEC) » g/m3 LOC...

Selecting the category on the basis of the zone: Selecting the zone on the basis of the category: Explosion Group and Temperature Class Explosion Group Explosion Type of Groups (all Groups Temperature Explosion proof device protection except mining) depending Class Protection

Flammable Gases - Explosion-related Values methane amyl acetate butyl acetate ethyl acetate methyl acetate propyl acetate acetone acetonitrile acetic acid acetic aldehyde ammoniac aniline benzene bromobutane bromoethane butane butane butyl methyl ketone butylamine cyclobutane cyclohexane cyclohexane cyclohexanone cyclopentane chlorobenzene chlorobutane chloroethane chloroethane chloroethylene(vinyl chloride) chloromethane chloropropane acetyl chloride allyl chloride cresol decahydronaphthalene (decalin) decane diacetone alcohol dichloroethane dichloroethylene dichloropropane diethylamine...

methyl formate petrol heptane hexane hexane kerosene methylamine methyl cyclo hexane carbon monoxide naphthalene nitroethane nitromethane nonane nonane octane pentane pentane petroleum pyridine propane propane propene (propylene) propylamine toluene triethylamine ethyl methyl ether IIB ethylene oxide (epoxyethane) IIB APPLICATIONS: OFF-SHORE APPLICATIONS: CHEMICAL INDUSTRY APPLICATIONS: MINING AND PUBLIC WORKS

STANDARDS COMPLIANCE SODECA's fans and extractors comply with the following standards: QUALITY ISO 9001:2008 Sistemas de gestión de la calidad. Requisitos. Quality management systems -- Requirements Ventiladores industriales. Ensayos de comportamiento en circuitos normalizados. Industrial fans -- Performance testing using standardized airways Laboratory Methods of Testing Fans for Aerodynamic Performance Rating Ventiladores industriales. Ensayos de comportamiento de ventiladores de chorro. Ventiladores industriales. Métodos de ensayos de ventiladores y su representación de ensayos....

Since its founding, Sodeca has specialised in the design and manufacture of fans and accessories for industrial applications. The combination of our experience - acquired over decades of working with fans - and the technological contributions of our engineers from different departments has made it possible for Sodeca to become one of the largest manufacturers of industrial ventilation in the world. Industrial applications demand the ability to adapt to the specifications of each project as well as manufacturing flexibility so as to satisfy the real needs of each client. In order to meet...

STANDARDS COMPLIANCE FOR RAILWAY AND ROLLING EQUIPMENT The ASCAMM technology centre studies Sodeca fans to ensure compliance with GOST and EN standards for products mounted in railway and rolling equipment. ASCAMM uses numerical simulations to check the fan design under the vibration and shock conditions required by the standards. as amn techno logy Impact The table shown below shows the impact requirements for equipment mounted in A-Class vehicles. Sodeca fans comply with EN-61737 impact requirements, which are the most restrictive. Related standards: GOST 30630.0.0-99 Environment...

SODECA extractors for naval & off-shore uses are recognised by most shipbuilders and defence companies worldwide as being of high quality and operating well in these types of applications. Extractors made to order can comply with the different requirements of classification and certification societies. The marine motors used are certified by most international marine classification bodies:

HEAVY DUTY FANS FOR INDUSTRIAL, NAVAL & OFF-SHORE, CHEMICAL INDUSTRY APPLICATIONS, USE IN MINES, PUBLIC WORKS, POWER STATIONS AND AND FOR RAILWAY APPLICATIONS CENTRIFUGAL FANS CASB Robust centrifugal single-inlet, medium-pressure fans fitted with an impeller with backward-facing blades Centrifugal single-inlet, high-pressure fans with casing and sheet steel impeller CMRG Centrifugal medium-pressure fans fitted with multiblade impeller made from stainless steel AISI-304 Centrifugal single-inlet medium-pressure hot-galvanised fans, to operate in chemical, aggressive or marine environments....