HATCH/HP
12Pages

THERMAL BRIDGE BREAK TECHNOLOGY HATCH/HP Smoke exhaust solutions with the highest thermal and air-tightness performance with motorised hatch CLASSIFICATIONS AND CERTIFICATIONS AIR TIGHT CLASS 4 IN ACCORDANCE WITH EN 12207 CLASS E 1350 IN ACCORDANCE WITH EN 12208 CERTIFIED IN ACCORDANCE WITH EN 12101-3 CERTIFIED IN ACCORDANCE WITH EN 12101-3 The entire assembly is F300 and F400 certification tested

EFFICIENT SOLUTIONS FOR SUSTAINABLE BUILDINGS The global concern derived from the climate crisis, which continues getting worse each year, has generated a trend in sustainable construction to reduce energy consumption and consequently, CO2 emissions. At SODECA we meet this demand with efficient solutions for sustainable buildings, where energy savings is one of the most important factors The installation of efficient solutions on the roofs of buildings for extracting heat and pollutants, as well as the ventilation of the building itself, are the most widely used systems for these types of...

01. AIR-TIGHTNESS Maintains the air conditioning of the building and at the same time prevents outside air from entering inside the building. 02. INSULATION Heat loss due to heat transfer when the extract system is not being used is practically null. 03. WATER-TIGHTNESS Unit completely water-tight, preventing water from leaking inside the unit.

ADVANTAGES OF HATCH/HP SOLUTIONS System completely free of thermal bridges and built using cutting-edge materials. 01. SMOKE EXHAUST CERTIFICATES Using roof-mounted motorised hatch systems with an F-400 or F-300 certificate for fire protection is one of the most efficient ways to comply with the smoke exhaust regulation as well as the energy efficiency regulations of each country. 02. VERSATILITY ]£ . il Solution suitable for smoke exhaust in the event of a fire, but also to remove heat and/or pollutants and for the ventilation of the building itself. With this versatility we are able to...

CUTTING-EDGE MATERIALS Dual air-tight seal; vertical and horizontal Pyramid cover with a polyurethane lacquer coating on the inside Aluminium profiles with thermal bridge break Powerful actuator Maintenance switches for the fan and hatch Highly insulated sandwich panel sides MAINTENANCE CUT-OFF INSIDE THE CASING We recommend installing maintenance switches inside the casing to: Ensure complete impermeability and water-tightness Avoid unauthorised manipulation of the switches Increase the useful service life of the maintenance switches * For models with F300/2h and F400/2h certifications,...

THERMAL TRANSMITTANCE The U coefficient indicates how much thermal energy per unit of time and unit of area is transmitted through a solid object at a temperature difference of the fluids of 1 Kelvin (1 °C). This U value is also called thermal transmittance. The greater the value of U, the more heat will flow through the casing during a specific amount of time and the lower the insulation. The lower the value of U, the better the thermal insulation properties The use of materials with a low thermal conductivity minimises the transfer of heat and cold through the casing, which will decrease...

THERMAL BRIDGE BREAK TECHNOLOGY Thermal bridge break technology is essential for units that are built using metal elements that communicate the outside with the inside of a building. This technology consists of cutting the thermal conductivity of these metal components with a material with less conductivity. THERMAL BREAK BRIDGE To provide excellent thermal performance and prevent possible condensation from forming inside, all metal components that communicate the exterior with the interior of the unit are equipped with a thermal bridge break. Sandwich panel made of pre-finished steel with...

CLASS 4 IN ACCORDANCE WITH EN 12207 CLASS E 1350 IN ACCORDANCE WITH EN 12208 Air tightness is a fundamental property for reducing the air conditioning losses of a building. Air conditioning loss is the leaking of air towards the inside or outside through unintended gaps or holes on the casing. The outside of the unit is completely impermeable to prevent outside water from entering. There are no orifices that communicate the outside with the inside and all joints are sealed. The outer casing of the HATCH/HP is completely sealed to prevent the entry or exit of air while the hatch is closed....

RESISTANCE TO FIRESNOW LOAD SL1000CERTIFIED IN ACCORDANCE WITH 12101-3CERTIFIED IN ACCORDANCE WITH 12101-3 The main purpose of this solution is the extract smoke in the event of a fire. For this reason, all HATCH/HP models are subjected to different robustness tests under extreme snow load and wind conditions, as well as fire resistance certification tests in accordance with standard EN-12101-3. Thanks to a powerful actuator and a completely rigid structure, a snow load resistance of 1000 Pa is achieved in all sizes. This unit has been tested and this snow load performance has been...

SOLUTIONS WITH MATCHING MOTORISED FACADE HATCHES An efficient solution: For day-to-day ventilation To minimise building heat loss For smoke extract in the event of a fire (in accordance with current legislation) To enhance buildings appearance by customising the hatch System tested and certified by accredited bodies WALL SYSTEM

HEADQUARTER Sodeca, S.L.U. Pol. Ind. La Barricona Carrer del Metall, 2 E-17500 Ripoll Girona, SPAIN Tel. +34 93 852 91 11 Fax: +34 93 852 90 42 General sales: comercial@sodeca.com Export sales: ventilation@sodeca.com PRODUCTION PLANT Sodeca, S.L.U. Ctra. de Berga, km 0,7 E-08580 Sant Quirze de Besora Barcelona, SPAIN Tel. +34 93 852 91 11 Fax: +34 93 852 90 42 General sales: comercial@sodeca.com Export sales: ventilation@sodeca.com EUROPE FINLAND Sodeca Finland, Oy HUITTINEN Sales and Warehouse Mr. Kai Yli-Sipila Metsalinnankatu 26 FI-32700 Huittinen Tel. + 358 400 320 125...