EC TECHNOLOGY SOLUTIONS
184Pages

NEW GENERATION EC FANS Draft

Since the company was incorporated in 1983, SODECA has focused its business activity on designing and manufacturing industrial fans, ventilation systems and smoke exhaust fans. SODECA fans and extractor systems undergo the most stringent quality procedures certified by BUREAU VERITAS, in accordance with 9001:2015. The quality of the product as well as the research and development methods used have made it possible for SODECA to become one of the most renowned fan manufacturers in the world. Among other aspects, one of our most important values is being customer service oriented, which is...

These new products exceed the requirements of the ErP 2009/125/EC Ecodesign Directive and its regulating provisions (EU) 327/2011 for fans, and 1253/2014 for ventilation units, collaborating with the EU KYOTO Protocol objective of reducing CO2 emissions. BENEFITS · Energy saving of 70%, thanks to EC TECHNOLOGY and speed control · Reduces energy costs · Reduces environmental impact · Low noise levels · Balanced ventilation at all times · Centralised installation and easy maintenance Industrial EC TECHNOLOGY motors, with technology developed by SODECA, are designed to meet IE4 and IE5...

7 SVE/PLUS/EW Low noise in-line duct extractor fans mounted inside a 40 mm phonoabsorbent acoustic insulated casing 14 SVE/PLUS/EW/CPC In-line duct fans, automatic operation, low noise level and constant pressure control 19 CL/PLUS/EC In-line extract fans for rectangular ducts with a 40 mm thick acoustic casing to reduce noise and EC Technology motor 24 CJK/EC Ventilation units for circular ducts, with 25 mm acoustic insulation casing, interchangeable covers and EC Technology motor 28 CJV/EW Extract fans with automatic operation, vertical air outlet, EC Technology motor and constant...

IE4 AND IE5 EC TECHNOLOGY MOTOR 93 HCT/EC Tubular axial fans, with EC Technology IE5 motor 86 HC/EC Wall mounted axial fans, with EC Technology IE5 motor 102 HFW/EC Hot dip galvanized tubular axial fans, with EC Technology IE5 motor 110 CBD/EC Double inlet centrifugal fans, direct motor EC Technology IE4 with integrated electronics and forward curved impeller CJBD/EC/CPC Acoustically insulated ventilation units, EC Technology IE4 motor with integrated electronics and constant pressure control 117 CBD/B/EC Double inlet centrifugal fans, direct motor EC Technology IE4 with integrated...

17g EC CONTROL Automatic regulation and control panel for ventilation systems with EC Technology motors 180 CAP/EC Intelligent control for the regulation of equipment with EC Technology fans prepared for external air quality probes 181 SI-PM2.5+VOC Intelligent probe for CAP/EC control, for the regulation of ventilation based on the parameters of solid particles and volatile organic compounds SI-CO2+VOC Intelligent probe for CAP/EC control, for the regulation of ventilation based on CO2 and volatile organic compounds parameters 182 mtp Brushless motor speed control 0-10 V

Fan: • Acoustic casing covered with sound absorbing material. • All models equipped with a backward curved impeller. • Standardised inlet and outlet flanges allowing for easy installation in ducts. • Fitted with a folding inspection hatch. • Support feet integrated into the box which facilitates its assembly. • Linear airflow direction. • Adjustable speed via a built-in 10 kQ potentiometer MTP010, or an external 0-10 V signal. Motor: • EC Technology external rotor motors with high efficiency and built-in variable speed drive controlled by 0-10 V signal. • Single-phase 200-240 V 50/60 Hz,...

Erp. (Energy Related Products) Information on Directive 2009/125/EC can be downloaded from the SODECA website or the QuickFan selector programme. Acoustic characteristics Sound power spectrum Lw(A) in dB(A) per Hz frequency band Irradiated values at maximum speed and medium flow rate.

Q= Flow rate in m3/h, m3/s and cfm Pe= Static pressure in mm H2O, Pa and inwg

Characteristic curves Q= Flow rate in m3/h, m3/s and cfm Pe= Static pressure in mm H2O, Pa and inwg

Characteristic curves Q= Flow rate in m3/h, m3/s and cfm Pe= Static pressure in mm H2O, Pa and inwg

Characteristic curves Q= Flow rate in m3/h, m3/s and cfm Pe= Static pressure in mm H2O, Pa and inwg inwg inwg

Characteristic curves Q= Flow rate in m3/h, m3/s and cfm Pe= Static pressure in mm H2O, Pa and inwg PERSIANA SOBREPRESION AIRFILTER BOCAS DE SALIDA PARA VIVIENDAS

SVE/PLUS/EW/CPC In-line duct fans, automatic operation, low noise level and constant pressure control Fan: • Acoustic casing covered with sound absorbing material. • All models equipped with a backward curved impeller. • Standardised inlet and outlet flanges allowing for easy installation in ducts. • Fitted with a folding inspection hatch. • Support feet integrated into the box which facilitates its assembly. • Linear airflow direction. Motor: • Single-phase 200-240 V 50/60 Hz, IP54 protection. Except SVE/PLUS/EW-400/H model, 200-277 V 50/60 Hz. IP55 protection. • Maximum temperature of air...

Erp. (Energy Related Products) Information on Directive 2009/125/EC can be downloaded from the SODECA website or the QuickFan selector programme. Sound power spectrum Lw(A) in dB(A) per Hz frequency band Irradiated values at maximum speed and medium flow rate.

Characteristic curves Q= Flow rate in m3/h, m3/s and cfm Pe= Static pressure in mm H2O, Pa and inwg Input power (W| Static Pressure (Pa| Input power (W) Static Pressure (Pa)

Characteristic curves Q= Flow rate in m3/h, m3/s and cfm Pe= Static pressure in mm H2O, Pa and inwg Input power (W) Static Pressure (Pa) Input power (W| Static Pressure (Pa)

Characteristic curves Q= Flow rate in m³/h, m³/s and cfm Pe= Static pressure in mm H₂O, Pa and inwg PERSIANA SOBREPRESIÓN BOCAS DE SALIDA PARA VIVIENDAS

CL/PLUS/EC In-line extract fans for rectangular ducts with a 40 mm thick acoustic casing to reduce noise and EC Technology motor Fan: • Galvanized steel sheet casing. • 40 mm acoustic insulation casing. • Backward curved impeller. • Linear airflow direction. • Fitted with a folding inspection hatch for ease of maintenance. Motor: • High efficiency EC Technology motors, outer rotor adjustable via 0-10 V signal. • Single-phase 200-240 V 50/60 Hz and three-phase 380-480 V 50/60 Hz. • Maximum temperature of air to be carried: -25 °C +60 °C. Finish: • Anti-corrosive in galvanized steel sheet....