CO2 CONTROL KITS
16Pages

CO2 CONTROL KITS KITS FOR CONTROLLED MONITORING AND VENTILATION, WITH REGULATION BASED ON THE CO2 CONCENTRATION · AUTOMATIC REGULATION BASED ON CO2 SENSOR READING · FAN WITH EC TECHNOLOGY MOTOR · SIMPLE VENTILATION OR WITH FILTERS KITS WITH SMART CONTROL FOR CO2 REGULATION THROUGH SIMPLE CMV VENTILATION UNITS WITH FILTER

CO2 is one of the contaminants most often found in building interiors, especially in high-occupancy buildings such as schools, restaurants and offices This is because 4% of human exhalation is carbon dioxide (CO2) BENEFITS OF CONTROLLED MECHANICAL VENTILATION In closed environments with large volumes of people, where there is inadequate ventilation, the amount of CO2 gradually increases. This increase in CO2 leads to headaches, fatigue, loss of concentration and a reduction in performance. Measuring and reducing it in closed areas is essential to maintain the good quality of the interior...

This kit is appropriate for installations where indoor areas can be ventilated by supplying external unprocessed air. WITH FILTERS CO2 reduction kit formed by a smart surface control and an in-line exhaust fan for circular ducts with a low noise level and EC Technology motor. This kit is appropriate for installations where it is necessary to filter the external air supplied for ventilating an indoor area. KIT SV/ FILTER-CO2 CO2 reduction kit formed by a smart surface control and a series of filtering units for circular ducts with a low noise level, different filtering phases and EC...

The CAP-CO2/EC control panel is ideal for air ventilation systems fitted with EC Technology motors with the electronics built-in to the motor itself. This control incorporates all the functions required for automatic regulation of the ventilation system, adjusting the rotational speed parameters of the fan based on the sensor reading and the objective CO2 value. There are two control options: a simple one called CAP-CO2/EC-S and another with Wi-Fi connectivity called CAP-CO2/EC-W. CAP-CO2/EC-S The CAP-CO2/EC-S is a wall-mounted control with the following features: and is also fitted with a...

KIT SVE/PLUS-CO2Simple CO2 reduction kit Simple CO2 reduction kit consisting of an intelligent surface control and a series of in-line duct extractors. Fan: • Acoustic casing covered with sound absorbing material. • All models equipped with a backward curved impeller. • Standardised inlet and outlet flanges allowing for easy installation in ducts. • Fitted with a folding inspection hatch. • Support feet integrated into the box which facilitates its assembly. • Linear airflow direction. Control: • Proportional regulation according to setpoint and CO2 measurement. • Time programming. •...

Acoustic characteristics Sound power spectrum Lw(A) in dB(A) per Hz frequency band Irradiated values at maximum speed and medium flow rate. 63 125 250 500 1000 2000 4000 8000

Characteristic curves Q= Flow rate in m³/h, m³/s and cfm Pe= Static pressure in mm H₂O, Pa and inwg

Characteristic curves Q= Flow rate in m³/h, m³/s and cfm Pe= Static pressure in mm H₂O, Pa and inwg

Pe= Static pressure in mm H2O, Pa and inwg KIT SVE/PLUS-CO2-200 m*/s

Characteristic curves Q= Flow rate in m³/h, m³/s and cfm

KIT SV/FILTER-CO2CO2 reduction kit with filtration CO2 reduction kit with filtration consisting of an intelligent surface control and a series of filtration units for circular ducts. Fan: • Acoustic casing covered with sound absorbing material. • Standardised inlet and outlet flanges with watertight joints. • F7 + F9 filters. Other combinations on request. • Easy access inspection and cleaning cover with manual fasteners. • Centrifugal fan with a backward curved impeller. • Integrated support into the box which facilitates its assembly. • Linear airflow direction. • 3 pressure taps for...

Acoustic characteristics Sound power spectrum Lw(A) in dB(A) per Hz frequency band Irradiated values at maximum speed and medium flow rate. 63 125 250 500 1000 2000 4000 8000

Characteristic curves Q= Flow rate in m3/h, m3/s and cfm Pe= Static pressure in mm H2O, Pa and inwg inwg inwg

Characteristic curves Q= Flow rate in m³/h, m³/s and cfm Pe= Static pressure in mm H₂O, Pa and inwg

Characteristic curves Q= Flow rate in m3/h, m3/s and cfm Pe= Static pressure in mm H2O, Pa and inwg inwg inwg

HEADQUARTER Sodeca, S.L.U. Pol. Ind. La Barricona Carrer del Metall, 2 E-17500 Ripoll Girona, SPAIN Tel. +34 93 852 91 11 Fax: +34 93 852 90 42 General sales: comercial@sodeca.com Export sales: ventilation@sodeca.com PRODUCTION PLANT Sodeca, S.L.U. Ctra. de Berga, km 0,7 E-08580 Sant Quirze de Besora Barcelona, SPAIN Tel. +34 93 852 91 11 Fax: +34 93 852 90 42 General sales: comercial@sodeca.com Export sales: ventilation@sodeca.com HELSINKI Smoke Control Solutions Mr. Antti Kontkanen Vilppulantie 9C FI-00700 Helsinki Tel. +358 400 237 434 akontkanen@sodeca.com HYVINKAA Smoke extraction and...