SURGYS® E10
2Pages

SURGYS® E10 Surge arrester - Types 2 and 3 for terminal receivers and sensitive loads The solution for Electronic protection > Industry > Infrastructure > All types of building (critical, non-critical) > OEM Strong points > Monobloc design > Plug-in module > Remote signalling SURGYS E10 - 2 pole MC/MD Function SURGYS® E10 surge arresters are designed to ensure protection of installations connected to single-phase, three phase or DC networks against industrial operation surges. They act against transient surges owing to lightning. Advantages Monobloc design Easy to install. Plug-in module Quick maintenance on end-of-life modules. Remote signalling With the remote signalling contact (plug-in) you can upload the alert to a supervisory device. Applications • AC or DC distribution board (downstream of a main switchboard). • Protection of electrotechnical equipment such as motors, switching devices, control devices... SURGYS G70 Compliance with standards > NF EN 61643-11 > IEC 61643

Surge arrester - Types 2 and 3 for terminal receivers and sensitive loads Front panel Specifications Mains 1. Monobloc design. 2. End of life signal. 3. Remote signalling contact. 4. DIN rail mounted. 5. Plug-in module. Mains type Neutral arrangement (see table) Temporary overvoltage withstand @ 120 sec (UT) Temporary overvoltage withstand @ 5 sec (UT) Connection mode Protection characteristics Temporary overvoltage from a HV mains, between N & PE in a TT arrangement Nominal discharge current (15 impulses 8/20 µs) In Max. current discharge (1 impulse 8/20 µs) Imax AC version - Common mode...