COMO CS Transfer switches Manual Cam Transfer Switches from 25 to 100 A The solution for > Industry (machine control) COMO CS - Door mounting I-II 3 P 25 A Strong points > Simple installation > Quick mounting > Effective in all circumstances Function COMO CS are manually operated multi-pole transfer switches. They ensure switching, transfer of sources or transfer of two low voltage circuits on load as well as their safe disconnection. Compliance with standards > IEC 60947-3 Advantages Simple installation The “quick fix” allows significant time saving in fixing the handle to the device. The devices sold in enclosed version are ready for installation. Quick mounting The accessories offered are common to all the products in the range. The products are designed for installation: - on the rear of the cabinet on a backplate, - on the rear of the cabinet on a DIN rail, - on the door with a direct handle. Effective in all circumstances The devices are available with 3 standard switching types that can cover a wide variety of applications: - I-II - I-0-II - I-0-II with bypass Please consult us for adaptations to specific wiring diagrams. * 88EJ &5LM6 * cULus under certification. Configurations Backplate switch mounted with external handle Direct quickfixing handle for door or backplate mounted switch Functional diagram (for further details see the installation instructions supplied with the product). 1. Shaft extension 2. Shaft guide 3. Signalling plate 4. Non padlockable handle

Manual Cam Transfer Switches from 25 to 100 A References COMO CS Backplate mounting with direct quickfixing handles or external handles Rating (A) Switching type Switch body rear mounting(1) Padlockable direct quick fixing handle Non-padlockable direct quick fixing handle Padlockable external handle (2) Non-padlockable external handle (2) (1) Mounting on DIN rail and backplate from 25 to 40 A and mounting on backplate for ratings from 63 to 100 A. (2) Delivered with shaft and plate for front external control. Door mounting with direct quickfixing handles Rating (A) Switching type Switch body...

Manual Cam Transfer Switches from 25 to 100 A Other solutions with enclosures General characteristics Available for switching types I-II and I-0-II • Different enclosure sizes adapted to your needs. • Maximum safety during maintenance operations due to triple padlocking of the handle in position 0 (position I for switching type I-II). • IP 65 / NEMA 4, 4X : When installed in an industrial environment, protection degree IP 65 and NEMA 4 , 4X ensures that the products are protected against dust and water jets. • Red-yellow operating handle. Switching type

Manual Cam Transfer Switches from 25 to 100 A Conventional free air thermal current Ith at 50 °C (A) Conventional free air thermal current Ith at 40 °C (A) Conventional free air thermal current Ith (60 °C) (A) Rated insulation voltage Ui (V) Rated impulse withstand voltage Uimp (kV) Rated operational currents Ie (A) Utilisation category at 400 VAC Associated fuse rating (A) Rated operational voltage (Va.c) Fuse protected short-circuit withstand with gG DIN fuses Connection Minimu-m CU cable cross-section (mm2) Maximum CU cable cross-section (mm2) Weight of a 3 pole device (g) Durability (number...

Manual Cam Transfer Switches from 25 to 100 A Dimensions (in/mm) 25 to 100A Mounting on door - Fixing with direct handle Door width Mounting on backplate / DIN rail - Rear fixing of direct handle L Mounting on backplate / DIN rail - Rear fixing of external handle X-L (3) I-II /I-0-II Unit (1) X is the distance between the inside of the door and the fixing plate (2) L is the total length of the shaft (max 200 mm) (3) Minimum distance between the inside of the door and the fixing plate

Manual Cam Transfer Switches from 25 to 100 A Dimensions for handles 25 to 100 A Front operation Direction of operation Door drilling Handle type 0.94 24.1 Front operation Direction of operation Door drilling Handle type