O Complete Freeze Protection for Process Instrumentation 为过程仪表提供全面的防冻保护 Totaal pakket voor de vorstbeveiliging van uw proces instrumentatie Protection-basse température complète pour l’instrumentation Kompletter Frostschutz fur Prozess-Instrumentierung Completa protezione antigelo per strumentazione di processo Komplett frostsikring av prosess instrumenter Completa Proteccion Contra Congelacion Para Instrumentacion de Proceso Design | Enclosures | Supports | Tu

An engineered, preinsulated tubing bundle system The content of this brochure covers our standardized Tracepak tubing bundle typically used for Instrument impulse lines or mechanical and utility process lines. For more information on sample analyzer or continuous emission monitoring (CEMS) applications please visit our STACKPAK brochure. TRACEPAK solves problems for analytical, instrumentation and mechanical plant utility applications: ▼ Dew point Component drop-out, Freezing, dew point, component drop-out and viscosity control are major considerations in instrument impulse connections, small...

Protecting instrumentation and tubin from freezing or maintaining process fluids at elevated temperatures involves many components, designs and engineering skills. Instead of specifying and purchasing individual components, have O’Brien provide an integrated solution with one source responsibility. impulse lines and instrument freeze protection combined with field support services sets the O’Brien solution apart from all others. TRACEPAK8 engineered, preinsulated tubing bundle for instrument impulse, sample transport, and small diameter process lines. VIPAK8 engineered enclosure system designed...

Code OD Wall Material Design • Enclosures • Supports • Tubing Bundle • Installation

SV47 is a proprietary thermoplastic formulation that exceeds the requirements of 105C PVC and outperforms other PVC jacket materials in UV resistance as well as providing low temperature flexibility.TPU is a thermoplastic polyurethane jacket that offers excellent abrasion resistance and extreme cold temperature workability. TPU also contains no chlorides so it should be selected for applications where chloride stress cracking is a problem. E = Excellent G = Good F = Fair P = Poor * Minimum service and installation temperature for SV47 have been determined by test on tubing bundles. The base material...

Preinsulated Tubing Bundle With Electric Heat Tracing TPE is designed to maintain freeze protection, close temperature tolerances or viscosity control. It provides an excellent means of maintaining very long, continuous lengths of impulse lines and piping at consistent temperatures end-to-end. TPE should be chosen when electric tracing is preferred, steam is not available or when the steam supply could be interrupted such as during shutdowns. Our extensive tracer offering allows TPE to be designed according to your specific application and temp requirements. When close temperature control is...

^O'BRIEN AMETEK

TPL / TPH STEAM TRACING Preinsulated Tubing Bundle With Steam Tracing TPL - Light Steam Tracing The tracer tube is wrapped with insulation to purposely reduce heat transfer to process tubes. It is suited for small diameter process lines such as those used for instrumentation, sampling and additives. TPL is recommended for freeze protection of instrument impulse lines as well as the process lines for analyzers. TPH - Heavy Steam Tracing Heavy tracing keeps the process tubing in direct contact with the tracer and maintains higher process temperatures. Insulation: Non-hygroscopic fiber glass with...

Non-hygroscopic fiber glass with water soluble chlorides less than 30 ppm. S-LINE* & J-LINE* A Weather-Proofed, Preinsulated Single Tubing Line S-Line is suggested for 1” (25mm) and smaller steam, condensate, liquid and gas transport lines where personnel protection and heat loss are important. S-LINE offers an inexpensive alternative to field insulation and weatherproofing of small diameter lines. High exposure temperature designs up to 1100F (593C) available, consult factory. A Weather-Proofed, Single Tubing Line J-Line tubing is designed for pneumatic and hydraulic applications in corrosive...

Solutions For Unique Applications In addition to conventional TRACEPAK designs, O’Brien can satisfy your needs with custom solutions. Modeling for these designs is verified in our environmental chamber under conditions insuring a tubing bundle that meets your exact requirements, with reliability and accuracy you can depend on. • Indoor & Outdoor Jackets • Custom Lengths • Factory Finished and Sealed Ends • Factory Installed Power and Termination Kits • Factory Installed Temperature Sensors • Communication, Monitor and Power Wires • Alternate Jacket Colors • Cryogenic Applications TRACEPAK can...

ACCESSORIES Sealing the Bundle Although TRACEPAK products use a non-hygroscopic, non-wicking insulation, all bundle ends must be sealed to prevent any possible moisture contamination. Heat Shrink Boots The heat-shrinkable boots provide a weatherproof end seal for TRACEPAK tubing bundles. They are made of thermally stabilized, modified polyolefin. Using a heat shrink end seal boot is recommended for all exposed ends. This installation will provide the best weather seal protection. Heat shrink boots have 400F maximum exposure rating. To Order: Refer to Heat Shrink Boot Index or Consult Factory...

Heat Shrink Entry Seal The heat-shrinkable entry seal provides a waterproof fitting where TRACEPAK enters an enclosure. They can be added to parting line or surface mounted plates on VIPAK enclosures. The thermally stabilized, modified polyolefin entry seal consists of a threaded assembly that seals at the enclosure and a heat-shrinkable nose that seals to the TRACEPAK bundle. Min Bundle OD 0.75” (19mm) 0.75” (19mm) 1.43” (36mm) 1.43” (36mm) 2.25” (57mm) NOTE: Consult Vipak brochure for entry seals to be used with Vipak instrument enclosures Jacket Patch Kits The jacket patch kits are used to...