*mydirectindustry

Catalogs
SOCLEMA
TAR PROTOCOL sampling system

TAR PROTOCOL sampling system

Product catalog summary

Overview
The document describes an automated sampling system designed for the analysis of synthetic gases (syngas) produced by pyrolysis gasification. This system is particularly focused on identifying tar-type organic contaminants such as BTX, PAH, phenol, and derivatives.

Specifications

Automated sampling with a Peltier module for cooling to -20°C, adjustable for both heating and cooling.
Includes a circulation pump for pressures below 0.5 bar and reinforced tank insulation to minimize ambient temperature effects.
Features Quick Connect In/Out connections and does not require dry ice for operation.
Flow rate and volume transfer are accurately managed using a mass flow meter.
Constructed from a single aluminum block for improved thermal conductivity.
Optimized gas exchange in isopropanol due to the elongated shape of the bottle.
Sample bottles are integrated into the cover for easy transport.
Available in different sizes and assemblies based on installation needs.

Advantages
SOCLEMA offers a turnkey solution for syngas sampling, which has been industrialized from a laboratory protocol for process measurements. The system allows for the isolation and analysis of contaminants through a process involving warmed and cooled bottles.

Applications

Characterization and removal of tar in syngas according to the TAR PROTOCOL.

Technical Specifications

Maximum service pressure: 1.5 barg
Service temperature range: -25°C to 180°C
Power supply: 220 V, with a consumption of approximately 1000 W
Cold bath temperature regulation: -20°C at ambient temperature
Heated bath temperature regulation: +40°C at ambient temperature
Ambient operating temperature: 0°C to 40°C
Bottle capacity: 240 ml
Sampling flow rate: 0.5 - 5 Nl/min

Additional Features

Includes a mobile trolley suitable for ATEX areas.
Components such as the pump, Peltier module, mass flowmeter, heated bath, and cold aluminum tank are highlighted.

Catalog excerpts

SOCLEMA provides a turnkey solution for sampling of synthetic gases (syngas) produced by pyrolysis gasification. This solution allows the identification of tar-type organic contaminants (BTX, PAH, phenol and derivatives, thiophene, etc...) produced during this process. This is a laboratory protocol that has been industrialized for process measurements. The successive passage between warmed and cooled bottles allows the isolation of these contaminants for analysis. Applications - Characterization of tar in syngas according to TAR PROTOCOL. - Removal of tar in syngas. - Accurate flow rate adjustment and volume transfer calculation using the mass flow meter. - Improved thermal conductivity due to tanks machined from single aluminum block. - Smart bubbling and gas exchange in isopropanol optimized due to elongated shape of bottle. - Sample bottles integrated into cover for easy transport to the measurement unit. - Different size and assembly available depending on installation requirements. Advanced Industrial Sampling

Open the catalog to page 1

Laboratory model drawing Removable part Mass flowmeter Handling handles Handling handles Cold aluminium tank Toggle latch Peltier module Heated bath Service temperature Maximum service pressure Power supply Power comsumption Cold bath temperature regulation Heated bath temperature regulation Sampling flow rate Bottle capacity ZA Clapeloup - 4, rue des Roses, 69280 Sainte-Consorce - France Ambient operating temperature

Open the catalog to page 2

All SOCLEMA catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list