Particulate & coalescing filter AVENGER 33M
2Pages

High performance filters providing the utmost flexibility for coalescing/particulate filtration needs! The Avenger™ 30M Series Filters provide sample conditioning and analyzer protection by using a disposable filter element to remove solids and liquid droplets from gas sample streams. Genie® Membrane Technology™ with Liquid Block™ can be added as an option to the 30 Series filters, in addition to the disposable filter element. The use of Genie® Membrane Technology™ in these filters will remove 100% of entrained liquid, including aerosols, from the sample stream. The Liquid Block™ will completely valve off flow through the membrane to prevent liquid break-through from occurring in the presence of excess liquid. The Avenger™ 30 Series sample filters are easy to install and maintain, especially in heated, densely populated cabinets. The uniquely designed filter housing allows service to the filter element/ membrane by simply removing the bowl without disassembly of the fittings. The Avenger™ Model 33M is the same size as the Model 33, and contains Genie® Membrane Technology™. The Liquid Block™ is on option for this model. When compared to the Models 38 and 38M, the Model 33M is larger in size and internal volume, making it better suited for applications requiring higher flow rates or containing larger amounts of contaminants than the Models 38 and 38M can handle. Technical Specifications Maximum pressure rating Maximum Liquid Block™ valve auto-reset pressure Maximum temperatures Applications • Continuous sampling in any process industry including natural gas, petrochemical, and oil refining • Coalescing liquid droplets • Particulate removal from gas sample streams Benefits • Analyzer protection against liquid droplets and micron/ submicron size particles • Quick and easy installation and maintenance • Multiple porting configurations 1,000 psig (68.9 barg) 85 psig (5.8 barg) Slowly open the supply pressure so that the minimum differential pressure required to shut off the Liquid Block™ is not met or exceeded Type 6 membrane: 185ºF (85ºC) *Type 7 membrane: 300ºF (149ºC) * Actual limit depends on sealing material chosen. Refer to Temperature Range Comparison Chart. Maximum Recommended Flow Rate Type 6 Best Rejection: 4.7 SLPM (10 SCFH) Type 7 Highest Temps: 13 SLPM (27 SCFH) Element size Outside Diameter: ~ 1.4” Inside Diameter: ~ 1.0” Length: ~ 2.5” Port sizes Inlet, Outlet, & Bypass: 1/2” female NPT Gauge: 1/4” female NPT Internal volume Wetted materials Machined parts: 316/316L stainless steel / ISO 15156-3 compliant All other metal parts: stainless steel / ISO 15156-3 compliant Sealing material: User defined Membrane: inert Results in approx. 2 PSI pressure differential. For higher flow rates, contact the factory. Product Brief Features • Genie® Membrane Technology™ • Liquid Bloc

Membrane type - Replacement filter and membrane kits contain 5 each. O-ring replacement kit contains all assembly o-rings. Side View Back View A SOCLEMk LffM Rn[RfiJteiniQOmii ic Ij li : : Corporation Analytically Correct™ sample systems, sample conditioning components, and revolutionary gas and liquid sampling technology. jjnfiBtgrSingmnSAINTE-CONSORCE - France Tel: +33 478 878 945 - info@soclema.com - www.soclema.com Genie®, Avenger™, Liquid Block™, and Genie® Membrane Technology™ are trademarks or registered trademarks of A+Corporation, LLC. All other referenced trademarks are the...