OdoZEN® (Low-Flow Serie) Odo EN ® - LF is a patented natural gas odorization system. It is particularly suited for use with renewable gases such as biomethane. It allows to odorise very low gas flows, from 5Nm3/h. A highly accurate system able to react to any sudden changes in pressure and flowrate, and able to dose over a wide range of concentrations.Features - Odorant injection regulating valve controlled via mass flowrate measurement. - Automatic or manual operation via controller. - Digital touchscreen interface. - System-specific injection probe connected to the skid. - Mercaptan injection by differential pressure. - ATEX zone 1 or zone 2 compliant. Benefits Yellow: Valve opening Red: Valve opening instruction Green: Measurement of odorant flowrate - Immediate response to variations in flowrate and/or pressure. - Stable and accurate dosing of the injected odorant. - Regulation can be coupled with a mercaptan analyser. - No risk of pudding at injection point. - Turnkey, self-contained and compact unit. - Custom system on request. \^7 Advanced Industrial Sampling

3D drawing of odorization panel 5 1 Mass flow meter 2 Flow control valve 3 Cylinder of mercaptan reserve 1 4 Pressure transmitter 5 Junction box Injection maximum pressure Odorant concentration setting 25mg/Nm3 (Other configurable values) Wetted materials Perfluorocarbon, Teflon and Viton Power supply 230 volts AC single phase (Rated power = 2000W Communication protocol Modbus Ethernet TCP/IP (communication module provided) Footprint (Approx.) Panel: 1000 x 1000 x 200 mm Enclosure: 530 x 430 x 200 mm Datasheet_ODOZEN-LF_V1 - January 2025 Operating ambient temperature Applications BioGNV station...