Catalogs >
SOCLEMA >
Genie 760 sampling probe

Genie 760 sampling probe
2Pages

Catalog excerpts

Direct Drive Probe™ The safest and most versatile non-membrane tip probes available on the market! The Direct Drive™ Model 760 is an adjustable length probe without a membrane tip. It can be used to sample liquids, gases that do not require a membrane or contain more entrained liquid than a membrane can handle, or high temperature gases. Applications that require vaporizing a liquid sample at the tap should use the Model 761, a low internal volume version of the Model 760. The 760 can be safely inserted into pressurized sources up to 3750 PSIG. Unlike other competitive insertion probes that require brute physical force or hydraulics applied to the backside of the probe for insertion, this probe is easily installed through a full port valve using either an open end or speed wrench. The 760 probe is offered with both threaded and flanged process connections, exotic materials of construction, and optional coatings from Silcotek™. The Model 760 can be mounted vertically or horizontally, and its installation process is simple and straight forward. Many features of the 760 combine to make it the safest, most durable probe available on the market. It's unique, one-piece body design with double mechanical safety interlocks to prevent the probe from self-retracting under any failure scenario. A thread die cleans the probe's threads to ensure proper engagement with mating parts, providing for a smooth retraction even after extended periods of service. A Genie® 133 Probe Assembly option is available for gas sampling applications where a membrane tipped probe cannot be used. This simple assembly includes a Genie® Supreme Model 133 Membrane Separator™ mounted onto the outlet of a Direct Drive™ Model 760. See Genie® 133 literature for details. The Sampling Experts'" | genietiiters.com Technical Specifications

Open the catalog to page 1

Model Numbering & Additional Part Numbers Your model number is determined by your speciﬁc needs. Choose options below. Sealing material J9 = RGD resistant HNBR 0 = Neoprene rubber Process connection Probe insertion length Outlet option Blank = Angled, with valve V = Straight, with valve Sealing material replacement Part # 760-5J90 for RGD resistant HNBR Speed wrench Optional gauge Part # ACC-SW Part # ACC- Q14KC (Packing Gland) (other materials available upon request) (Typically used with liqueﬁed gases) (contact factory for ﬂanged options) (24” maximum for exotic materials) NV = Angled, no...

Open the catalog to page 2

Genie 760 sampling probe 2Pages

Catalog excerpts

All SOCLEMA catalogs and technical brochures

Genie 760 sampling probe
2Pages