The safest and most versatile membrane tip probes available on the market Liquid carryover from the pipeline into the sample system should be prevented when sampling natural gas as it can directly impact the analysis and damage the analyzer. Industry standards state that the equipment used to remove the liquid from the sample must be operated at flowing temperature and pressure conditions. Genie® Probes™ provide a means to insert Genie® Membrane Technology™ directly into a pipeline for the purpose of separating unwanted liquid and particulate from the gas sample at flowing conditions. The Model 750 is an adjustable length, membrane tip probe designed to sample transmission quality natural gas. It can be inserted and extracted from a pressurized line through a full opening valve without the use of a special insertion device. This probe is offered with both threaded and flanged process connections, many different exotic materials of construction (Duplex SS 205, Hastelloy® C276, Inconel® 625, & Monel® 400), and optional coatings from SilcotTek®. The Model 750 can be mounted vertically or horizontally, and its installation process is simple and straight forward. A low internal volume option is available for trace measurement applications or low sample flow rates. A+ Corporation also offers a complete line of upstream and midstream gas and liquid sampling products. Contact the factory for more information. Technical Specifications The Sampling Experts'" | genietiiters.com GEM IE750Direct Drive ProbeProduct Brief Applications • Continuous and composite gas sampling of transmission quality natural gas • Sampling of various types of gases in the refinery & petrochemical industries • Gas sampling of mixtures containing less than 30% hydrogen Benefits • Genie Membrane Technology • Easy, quick, and safe insertion and extraction from pressurized systems without a special insertion device • Horizontal or vertical mounting • Velocity tested by CEESI flow lab up to 200 ft/sec • API, GPA & ISO standard compliance Features • Unique, one piece body with Genie Membrane Technology • Analytically Correct" design • Adjustable length with threaded or flanged process connection • Antifriction internal thread die • Optional speed wrench for faster installation • Hex adapter with W female NPT outlet and integrated outlet shut-off valve

Model Numbering & Additional Part Numbers Your model number is determined by your specific needs. Choose options below. Sealing material Membrane type 0 = Neoprene rubber J = RGD resistant HNBR (other materials available upon request) 6 = Better Rejection; Rejects ALL types of liquids from vapor 7 = Highest Temps; Rejects ONLY high surface tension liquids Process connection Probe insertion length Sealing material replacement Part # 75X-570 for PTFE/Neoprene rubber Membrane replacement Speed wrench Optional gauge Part # 75X-CMA-50_ Part # ACC-SW Part # ACC-Q14KC (Packing Gland) (contact factory...