ALUBOX Series Junction boxes for electrical installations
2Pages

INFOTECH > REFERENCE STANDARDS EN 61242 Electrical accessories. Cable reels for household and similar purposes. > BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS Saline solution Solvents Mineral oil Diluted Concentrated Diluted Hexane Benzol Acetone Not Resistant Limited Resistance Resistant Not Resistant Not Resistant Not Resistant Limited Resistance Resistant Resistant Alcohol Not Resistant UV rays > TECHNICAL CHARACTERISTICS Cable reel without plug and connector - IP41 Cable reel with domestic plug and trailing socket for domestic application - IP40 Cable reel with plug and portable lamp - IP20 Cable reel with plug and portable lamp - IP40 Series technical sheets Bases Concentrated Resistant > VERSIONS Acids Rated current: Rated voltage: Frequency: Insulating voltage: SELV transformer 220/24V: Protection degree: Operating temperature according to the reference standard: Max operating temperature: Glow wire test: Material: IK degree at 20°C: Max load wound: Cable: 2,5A - 4A - 6A - 10A 12÷24V~ - 230V~ 50 Hz 250V~ 60W IP20 - IP40 - IP41 Portable lamp: handle made of non-hygroscopic insulating material, guard, conforms to EN 60598-2-8 and all live parts are completely insulated. There is a hooking eye on the AUTOROLLER for hanging up the lamp when it is not in use. > APPLICATION EXAMPLES -25°C+40°C 60°C 650°C/850°C Engineering plastic IK08 2300W H07RN-F (cable reel with plug and portable lamp) H05VV-F Wall mounting bracket: allows the Autoroller to be secured onto any vertical surface. There is housing for the safety transformer and two cable clamps are fitted onto the rear of the bracket. When correctly installed, the bracket allows the unit to swivel 310 ° in the direction of the cable pull. AUTOROLLER Series > CABLE REELS WITH AUTOMATIC REWIND AROL-GB-10 AUTOROLLER Series

INFOTECH 1 - Wall mounting bracket Made of an engineering plastic, it is designed to hold the cable reel and allow it to swivel through 310 °. 2 - Automatic rewind unit A sturdy casing made of engineering plastic contains the automatic cable rewind device, which is made up of a highstrength spring. Electrical continuity is maintained at all times by means of an integral slip-ring configuration (rated at 10 A ). Two rollers located at the cable outlet ensure kink-free rewinding. 3 - Transformer (SELV) An isolating transformer can be fitted on the wall bracket. A luminous two-pole switch...