Catalogs >
SMW AUTOBLOK >
US-CL US-A

US-CL US-A
2Pages

Catalog excerpts

With 2 jaw long stroke chuck With 3 jaw long or normal stroke chuck Stationary cylinder + chuck unit Ø 80 - 315 mm ■ hydraulic cylinder module + chuck ■ closed center chucks type CL/AN/AL Application/customer benefits • Gripping units designed to suit special purpose machines and transfer lines • Also used as loading chucks to handle workpieces Technical features • stationary hydraulic cylinder + chuck unit consisting of a modular cylinder and standard 2- or 3-jaw-chuck permanent oil pressure required for chuck details please see technical data of the selected chuck Remark: when ordering please specify the position of the oil connectors (on the side or on the back) Standard equipment Standard chuck with cylinder and connecting parts Ordering example US 125-CLC with rear oil connection, or US 250-AND with side oil connection and chuck 90° revolved ■ US-CL-C = cylinder equipped with a 2 jaw chuck type CL-C (long stroke/tongue & groove). Chuck Ø 80 to 160 mm. CL-C Ø 80 − 160 CL-D Ø 200 − 315 ■ US-CL-D = cylinder equipped with a 2 jaw chuck type CL-D (long stroke/inch serration). Chuck Ø 200 to 315 mm. ■ US-AN-D = cylinder equipped with a 3 jaw chuck type AN-D (normal stroke/inch serration). Chuck Ø 125 to 315 mm. ■ US-AN-M = cylinder equipped with a 3 jaw chuck type AN-M (normal stroke/metric serration). Chuck Ø 125 to 315 mm. ■ US-AL-D = cylinder equipped with a 3 jaw chuck type AL-D (long stroke/inch serration). Chuck Ø 125 to 315 mm. ■ US-AL-M = cylinder equipped with a 3 jaw chuck type AL-M (long stroke/metric serration). Chuck Ø 125 to 315 mm. ■ US-AN-C = cylinder equipped with a 3 jaw chuck type AN-C (normal stroke/tongue & groove). Chuck Ø 165 to 315 mm. ■ Special units = on request the US cylinder can be equipped with other chucks, for example with a quick jaw change chuck type AN-RM with stationary cylinder available. CL chuck in standard position CL chuck 90° revolved Side oil connections AN/AL chuck in standard position AN/AL chuck 90° revolved Side oil connections Side oil connections Rear oil connections ■ The chuck can be mounted on the cylinder 90° revolved if the standard position creates interferences with the working cycle. Please specify in the order, if a revolved position is needed. Side oil connections Rear oil connections ■ The oil connections can be on the side or on the back of the cylinder in order to ease the installation of the gripping unit

Open the catalog to page 1

Stationary cylinder + chuck unit 0 80 - 315 mm ■ hydraulic cylinder module + chuck With 2 jaw With 3 jaw long or ■ closed center chucks type CL/AN/AL long stroke chuck normal stroke chuck US actuating cylinder dimensions SMW-AUTOBLOK cylinder Units with CL-C and CL-D chucks (more information at general catalog page 78)

Open the catalog to page 2