Product Features:
This infrared preheater uses advanced PID intelligent temperature control for precise heating. It is suitable for PCB boards with or without lead, especially BGA and SMD parts. The machine features a 600W heating system with a 280 x 270mm heating area and is easy to operate with minimal training.

Technical Parameters:
The workbench measures 410x316mm, operates at AC110V 50Hz, with a total machine power of 1600W and a preheating plate power of 1500W. The temperature range is 0 - 450°C.

Main Components:
The device includes a preheating plate body, temperature sensor, PCB board holder, power line cord, and user manual.

Main Component Functions:
The preheating plate body, front panel, side panel, and PCB board holder are detailed with their respective functions, including temperature control and power indicators.

Operation Instructions:
1. Inspect and power on the machine, adjusting the temperature using the front panel controls.
2. Place and adjust the PCB board, setting the temperature based on lead content.
3. Preheat by pressing 'ON', and ensure cooling before turning off.
4. Installation involves selecting heating methods based on temperature requirements.

Cautions:
Ensure the preheater cools completely before turning off, maintain ventilation, clean regularly, and avoid burns. Disconnect power if not in use for extended periods.

Warranty:
The machine has a one-year warranty, with spare parts covered for three months. Contact technical support for discrepancies between the manual and the product.