QM1500ds - 10 Pages

Add to MyDirectIndustry favorites

Catalog excerpts

QM1500 FULLY AUTOMATED PICK & PLACE MACHINE A Remarkable and Economical Pick & Place Machine Intended for Small Batches & SMT Prototype Projects. Features and Benefits • Teledyne DALSA Vision System • 2 pick and place heads • PCB Fixture max size 17"(431mm)×12"(304mm) capable of holding one JEDEC Tray once PCB. • Operates with pneumatic feeders, 20 ports installed in the front side, 20 more ports optional (for rear side) • One up looking camera for part inspection before placement. • One Down looking camera for Fiducial Recognition & feeder set up. • Placement rate 3,000 Parts Per Hour • Dual Linear Guide Way and Ball Screws. • Two day training included at SMTmax facility. The QM1500 is a fully automated pick & place machine intended for SMT manufacturing and producing prototypes, developed by SMTmax. This remarkable, highly flexible and economical pick & place machine provides the need for a machine that produces small batches & prototypes for t

 Open the catalog to page 1

QM1500Fully Automated Pick & Place Machine High precision with Dalsa Vision system and camera The QM1500 is standard equipped with the latest generation Dalsa Vision system, which gives you repeatability and alignment correction before placement. One down looking camera is standard for fiducial recognition and feeder alignment. One up looking camera is standard for part correction down to 0201. A second camera with larger lens for placement of large fine pitch components is optional.

 Open the catalog to page 2

QM1500 Fully Automated Pick & Place Machine Dual Head Two Placement heads with individual Z-axis control.

 Open the catalog to page 3

QM1500 Fully Automated Pick & Place Machine Static PCB & JEDEC Tray Fixture Static Fixture standard with maximum adjusting size 17"(431mm)× 12"(304mm) and minimum size of 1”(25mm) x 1”(25mm) Dual arms capable of holding one JEDEC Tray once PCB depending on overall SMT board size. Maximum head travel area 20"(500mm)×18"(460mm) In line Conveyor system is option

 Open the catalog to page 4

QM1500 Fully Automated Pick & Place Machine Automatic nozzle Changer (optional) The QM1500 is standard equipped with Ten SMT nozzles ranging from 0.5mm up to 5.0mm and one nozzle stem. The nozzle changer fixture is designed for automatic nozzle exchanging and is highly recommended for placement of difference size SMT components. It can be program by using the down looking camera and software to automatically place back current nozzle and pick up required nozzle for larger or smaller component.

 Open the catalog to page 5

QM1500 Fully Automated Pick & Place Machine PCB Inline Transport Conveyor (Optional) The inline transporting conveyor is ideal for full turn key line that will allow you to link up to a inline stencil printer or inline reflow oven. PCB is inserted on the right side and will automatically convey to the center of the pick and place, after completion it will convey outside. Width is adjustable and can be opened up to 8” (203mm) and the maximum length of 17” (431mm

 Open the catalog to page 6

QM1500 Fully Automated Pick & Place Machine Manual Tape strip feeder (Optional) For small strips of SMD tape we offer a five channel tape strip feeder that can be adjusted to any width of tape. Vibratory Feeder (Optional) For SMD components package in plastic tube, vibratory feeder can hold up to five tubes depending on tube width, each channel adjustable to any size.

 Open the catalog to page 7

20 Air Actuated Feeder ports and controller included, feeders are sold separately (in rear of the machine) Can hold up to 40 of our 8mm feeders. 20 Feeder bank port included and mounted on the front side of the machine, 20 additional feeder bank port can be mounted on the rear side. Individual feeders sold separately, ranging from 8mm-56mm. Easy to remove and replace.

 Open the catalog to page 8

Dispensing head option for applying solder paste or SMD-glue, controlled by the SMTmax software! The PCB's Gerber file can be converted into a dispensing list file providing all dispense positions, can also be programmed one at time by teach mode, recommended for prototyping. Dispensing can be done directly from the 10cc syringe by time pressure. itw |5M>:    StallV    SiofrX | SKinV llwt |Xffl*|W«|;OHMi|0<yP*nW100    Wan GoTo|ltoft|| 6cTo|Canga|| Hwt j DspywHan| SetCtf | UpisfeO^aji | Charge OdSia | Change 5pd Start Dawns DmenargSpd Geibn Curved PjDeOvfflii U««deUpPH

 Open the catalog to page 9

QM1500 Fully Automated Pick & Place Machine Specificatio ns: 2 pick and place heads Standard 0201 Minimum Component Size Computer vision automatic centering system for IC's (SOP, QFP, BGA) and better placement of small parts included X & Y Axis standard with servo motors with encoder 1 JEDEC tray holder 12 month full factory warranty - parts & labor 0.001" positioning resolution, 0.045° rotational resolution Pneumatic feeders 20 feeder ports ready to go, 20 additional optional SMTmax Corporation 5675 Kimball Ct Chino, CA 91710 Phone: 909-393-8700 www.smtmax.

 Open the catalog to page 10

All SMT MAX catalogs and technical brochures

  1. QM1100

    9 Pages

  2. QM2100

    10 Pages


    15 Pages

  4. chipcounter

    47 Pages

  5. QM1100-A

    9 Pages

  6. QM3000

    10 Pages

Archived catalogs

  1. AE Reflow Oven

    21 Pages