QM1100-A - 9 Pages

Add to MyDirectIndustry favorites

Catalog excerpts

QM1100-A FULLY AUTOMATED TABLETOP PICK & PLACE MACHINE A remarkable and economical Pick & Place machine intended for small batches & SMT prototype projects. Features and Benefits • Teledyne DALSA Vision System • Two Heads for pick up • PCB Fixture max size 12"(304mm)×12"(304mm) capable of holding one JEDEC Tray once PCB. • Operates with pneumatic feeders, 20 ports installed in the front side, 20 more ports optional (for rear side) • One up looking camera for part inspection before placement. • One Down looking camera for Fiducial Recognition & feeder set up. • Placement rate 3,000 Parts Per Hour • Paste dispenser option available, for Auto dispensing • Dual linear guide way with Ball Screws. • Two day training session at SMTmax included The QM1100-A is a fully automated pick & place machine intended for SMT manufacturing and producing prototypes, developed by SMTmax. This remarkable, highly flexible and economical pick & place machine provides the need for a machine that produces small batches & prototypes for

 Open the catalog to page 1

QM1100-A Fully Automated Tabletop Pick & Place Machine High precision with Dalsa Vision system and camera The QM1100-A is standard equipped with the latest generation Dalsa Vision system, which gives you repeatability and alignment correction before placement. One down looking camera is standard for fiducial recognition and feeder alignment. One up looking camera is standard for part correction down to 0201. A second camera with larger lens for placement of large fine pitch components is optional.

 Open the catalog to page 2

QM1100-A Fully Automated Tabletop Pick & Place Machine Two Head Placement Two Placement heads with individual Z-axis control.

 Open the catalog to page 3

QM1100-A Fully Automated Tabletop Pick & Place Machine Static PCB & JEDEC Tray Fixture Static Fixture standard with maximum adjusting size 12"(304mm)× 12"(304mm) and minimum size of 1”(25mm) x 1”(25mm) Dual arms capable of holding one JEDEC Tray once PCB depending on overall PCB board size. Maximum head travel area 13"(330mm)×15"(381mm) In line Conveyor system is not option

 Open the catalog to page 4

QM1100-A Fully Automated Tabletop Pick & Place Machine Pneumatic Feeders The QM1100-A is standard equipped with a set of 20 feeder port carriers, mounted on the front side of the machine, each port can fit one single 8mm feeder, larger size feeders may take more space away, additional set of 20 feeder ports can be added to the rear of the machine for an additional cost. Feeders are not included and sold separately.

 Open the catalog to page 5

QM1100-A Fully Automated Tabletop Pick & Place Machine Automatic nozzle Changer (optional) The QM1100-A is standard equipped with Ten SMT nozzles ranging from 0.5mm up to 5.0mm and one nozzle stem. The nozzle changer fixture is designed for automatic nozzle exchanging and is highly recommended for placement of difference size SMT components. It can be program by using the down looking camera and software to automatically place back current nozzle and pick up required nozzle for larger or smaller component.

 Open the catalog to page 6

QM1100-A Fully Automated Tabletop Pick & Place Machine Manual Tape strip feeder (Optional) For small strips of SMD tape we offer a five channel tape strip feeder that can be adjusted to any width of tape. Vibratory Feeder (Optional) For SMD components package in plastic tube, vibratory feeder can hold up to five tubes depending on tube width, each channel adjustable to any size.

 Open the catalog to page 7

Dispensing Adaptor (Optional) Dispensing head option for applying solder paste or SMD-glue, controlled by the SMTmax software! The PCB's Gerber file can be converted into a dispensing list file providing all dispense positions, can also be programmed one at time by teach mode, recommended for prototyping. Dispensing can be done directly from the 10cc syringe by time pressure. StartX Start V | StopX | SropY | Lrao. [ X-Qfftetl Y-Ofim] ZQffat:| Dal Paste liraflOO DHpBrtteSpd | Holt GoToflteml GoTolCanwal Next Oitponje Item SetCu Start Deiatfmsl D:swren{jSpd Early Start step Paste Overtaj

 Open the catalog to page 8

QM1100-A Fully Automated Tabletop Pick & Place Machine Specifications: 2 pick and place head Standard 0201 Minimum Component Size Computer vision automatic centering system for IC's (SOP, QFP, BGA) and better placement of small parts included X & Y Axis standard with servo motors with encoder 1 JEDEC tray holder 12 month full factory warranty - parts & labor 0.001" positioning resolution, 0.045° rotational resolution Pneumatic feeders 20 feeder ports ready to go, 20 additional optional SMTmax Corporation 5675 Kimball Ct Chino, CA 91710 Phone: 909-393-8700 www.smtmax.com

 Open the catalog to page 9

All SMT MAX catalogs and technical brochures

  1. QM1100

    9 Pages

  2. QM2100

    10 Pages


    15 Pages

  4. chipcounter

    47 Pages

  5. QM1500ds

    10 Pages

  6. QM3000

    10 Pages

Archived catalogs

  1. AE Reflow Oven

    21 Pages