TORK Electric Actuators
TORK Electric Actuators
- Suitable for ball and butterfly valves with a compact design and electrostatic powder-coated aluminum body.
- Features manual control and valve position indicator, operating on 85-265 VAC, 24 VDC, or 12 VDC with 40 Nm torque output.
- IP65 enclosure, optional IP67, and operational temperature range of -20°C to 60°C.
- Similar to TREA40 with additional IP68 and ATEX options.
- Torque outputs of 60 Nm and 80 Nm, with IP67 body enclosure and optional IP68.
- Includes a 2-watt interior heater and proportional flow control options.
- Designed for higher torque applications with 150 Nm and 200 Nm outputs.
- Features IP68 and ATEX options, a 5-watt interior heater, and S2 and S4 working ratios.
- Supply voltage options: 110 VAC, 230 VAC, or 24 VDC.
- Models REA40 to REA3000 for torque requirements from 40 Nm to 3000 Nm.
- Corrosion-resistant polyester painted bodies, IP67 weatherproof enclosures, optional IP68.
- Battery-operated models for safety applications during power failures.
- Battery-operated actuators for emergency operations.
- Local Control Units (LCU-B and LCU-C) offer phase protection, error monitoring, and integrated design for REA series.
- Designed for globe valves with various shaft speeds and power values.
- Features aluminum injection bodies and weatherproof enclosures.
- RS485 Communication: Enables connection and data transmission to control units and computers.
- Automatic Phase Distributor: Ensures efficient phase distribution.
- Body and Enclosure: Aluminum injection, weatherproof with IP67, NEMA4, and NEMA6 ratings, includes a 10-watt heater.
- Hand Control Unit: Features a delatching mechanism with a locking gear lever and gearbox.
- Working Voltage: 220V AC, with options for 110V AC, 380V, and 440V AC 3-phase.
- Open/Close Time: 12 to 37 seconds depending on frequency and phase.
- Motor: Reversible, capable of rotating in two directions.
- Limit and Torque Switches: Includes limit switches and torque switches for open and close operations.
- Control: On-off with optional proportional control.
- Working Voltage: 220V AC, 50Hz, with options for 110V AC and 24V DC.
- Open/Close Time: 13/14 seconds.
- Output Torque: 40 Nm to 3000 Nm.
- Enclosure: IP67, with optional IP68 and explosion-proof features.
- Ambient Temperature: -20°C to 70°C.
- Optional Features: Local control unit, potentiometer, position transmitter, and proportional unit.
- Body: Full bore, AISI 316 stainless steel, two-way or three-way configurations.
- Pressure and Temperature: Low and high pressure, -20°C to 180°C.
- Working Pressure: PN 40 bar for smaller sizes, 16 bar for larger sizes.
- Testing: All valves tested at 20 bar for 48 hours.
- Special Requests: Two-piece ball valve available.
- Body: GG 25 grey cast, epoxy coated, optional Rilsan coating or stainless steel.
- Disc: GGG50 ductile iron, optional Rilsan coating or stainless steel.
- Sealing: EPDM or NBR, optional PTFE, viton, or silicon.
- Working Temperature: -30°C to 130°C.
- Working Pressure: PN 6, optional PN 10 or PN 16.
- Shaft: AISI 420 stainless steel.
Head Office: Bostancı Yolu Cad, Kuru Sok, No16 Y. Dudullu, 34776 Ümraniye / İstanbul-TÜRKİYE
Factory: Çerkeşli OSB Mah. İmes 2. Cad. No.5 41455 Dilovası / Kocaeli - Türkiye
Phone: +90 216 364 34 05, +90 262 290 20 20
Fax: +90 216 364 37 57, +90 262 290 20 21
Catalog excerpts
fluid under control valve & automation ELECTRICACTUATORS ball valves, butterfly valves and damperlerin on-off veya oransal kontrolu ®SIL3ROHS<t|5>
Open the catalog to page 1
Body Torque Output Value Body Enclosure Hand Control Unit Supply Voltage Supply power : Open-Close Time Motor Environment Temperature Cable Connection Entry Valve Connection Flange Limit Switches Auxiliary Limit Switches ■tork" valve & automatio n General Features • Specifically designed for ball valve, butterfly valve and dampers control. • Long lasting, light and compact design • Elecrostatic powder coated aluminium body • Easy installation (ISO5211 standard) • Manual Control with handwheel • 2 pieces output limit switches • Valve position indicator • 85-265 VAC - 24 VDC or 12 VDC voltage On-Off...
Open the catalog to page 2
Electric Actuators Sizes Product and Piece Pictures Position Indicator Manuel Control Handle Electronic Control Card Cam and Limit Switches Underbody (Threaded Area)
Open the catalog to page 3
General Features • Specifically designed for ball valve, butterfly valve and dampers control. • Elecrostatic powder coated aluminium body • IP68 or ATEX options • Easy installation (ISO5211 standard) • Manual control with handwheel • 2 pieces output limit switches • Automatic exit from manual mode with motor energization • 2 Watt interior heater • Valve position indicator • Long lasting • Working Rate: S2: % 100 max. 30 min. (110 Volt or 230 Volt AC Motor) S4: %70, 1000 Start/Hour (24 Volt DC Motor) Optional Features Aluminium injection, electrostatic powder coated If ATEX, TEXN829 E/P BRIGHT...
Open the catalog to page 4
Electric Actuators Product and Pieces Pictures Position Indicator Motor Manual Handwheel Cable Entries Connection Terminal Mechanic Stopper Manual Star Knob
Open the catalog to page 5
valve & automation TREA150 and TREA200 Electric Actuator Standard Features General Features • It is designed for the control of ball valves, butterfly valves and dampers. • Electrostatic powder painted body • IP68 and ATEX options • Easy installation (compliance with ISO5211 standard) • Manual control with handwheel • 2 output limit switches • Exiting automatic manual mode with motor energizing (Auto De-clutch) • 5 Watt interior heater • Valve position indicator • Long life • Working Ratio: S2: 100% max. 30 min. (110 Volt and 230 Volt AC Motors) S4: 70%, 1000 Starts / Hour (24 Volt DC Motor)...
Open the catalog to page 6
valve & automation Electric Actuators Position Indicator Product and Part Pictures Cover Connection Terminals Motor Manual Hand Wheel Cam and Limit Switches Cable Input Mechanic Stopper Manual Star Knob
Open the catalog to page 7
Plastic injection 60 Nm IP65 It is near the actuator body and make opening / closing 100-240 V AC or 24 V DC/AC 20 Watt, 0.85 A @24 VDC 20.7 Watt, 90 mA @230 VAC Open Close Time : Limit Switches : Auxiliary Limit Switches : Environment Temperature : Cable Connection Entrance : Valve Connection Flange : ■tork" valve & automatio n TREAE60 Elektric Actuator Standard Features General Features • Specifically designed for ball valve, butterfly valve and dampers control. • Long lasting and economic structure • Easy installation (ISO5211 standard) • Manuel control with handwheel • 2 piece output limit...
Open the catalog to page 8
Electric Actuators Sizes Ø 70 Ø 50 Ø 36 Product and Pieces Pictues Position Indicator Position Indicator Manual Control Handle Gear Camlar and Limit Switches Control Card
Open the catalog to page 9
General Features • Specifically designed for ball valve, butterfly valve and dampers control. • Small, light and compact design, with high torqu output, different control options • Corrosion resistant polyester painted body • Various output torque value from 40 Nm to 60 Nm • Water and dust insulation with O-ring structure IP67 • ISO5211 standard and easy mounting • Hand control unit • Standard 4 pieces limit switches • Space heater with thermostat far preventing overheat (On REA60 models) • Valve position indicators • Long lasting Optional Features • Proportional card PCU is suitable for REA60...
Open the catalog to page 10
REA80 ... REA3000 Serie Position Indicator Actuator Body Electric Terminals Limit Switch Tork Switch System Mechanic Stoppers Manuel Handle ISO5211 standard valve connection flange Heater and Thermostat Manuel Override
Open the catalog to page 11
Electric Actuators REA80 and REA3000 Electric Actuator Standard Feature: Body Torque Output Value Body Enclosure Handle Control Unit Working Voltage Open Close Time Motor Limit Switches Auxiliary Limit Switches Torque Switch Local Indicator Mechanic Stopper Ambient Humidity Ambient Temperature Cable Connection Entrance Valve Connection Flange Aluminium injection, electrostatik polyester dyed 80 Nm ... 3000 Nm Weatherproof, IP67, NEMA4, and NEMA6, There is a heater (10 watt) against humidity inside the body. Optional IP68 Delatching mechanism located outside the body, (locking gear lever, gearbox)...
Open the catalog to page 12
Battery Operated Electric Actuator Standard Features (REA B Serie) • Battery operated electric actuators developed for applications requiring safety. • Act as spring return actuator. • In an emergency or power failure situation, valve can be operated 5 times on-off. • For REA 80 ... REA 3000 serie Body Torque Output Value Enclosure Handle Control Unit Working Voltage Open Close Time Motor Limit Switch Torque Switch Local Indicator Mechanic Stopper Ambient Humidity Ambient Temperature Cable Connection Entrance : Aluminium injection, electrostatic polyester dyed : 80 Nm ... 3000 Nm : Weatherproof,...
Open the catalog to page 13
-tork-Electric ActuatorsDijital Local Control Unit (LCU-C Serie) • For REA 150 ... REA 3000 serie • 220 V AC / 460 V AC three-phase application • Light, compact and integrated design • The cable entry terminal can be moved outside the actuator. • Resistant to water, vibration and temperature. • RS485 communication connection feature • Automatic phase distributor feature • Operating panel, power control, error, open and closed position signals are displayed on the panel and this information is transmitted to the control unit via a cable and transmitted to the computer via RS485 connection feature....
Open the catalog to page 14All SMS-TORK catalogs and technical brochures
Natural Gas Products8 Pages
Scotch Yoke Pneumatic Actuators10 Pages
Globe Control Valves15 Pages
Tork Pneumatic Piston Valves26 Pages
TORK General Catalogue52 Pages
Pulse Valve16 Pages
TORK Pneumatic Actuators42 Pages
- TORK manual valve
- TORK control valve
- TORK stainless steel valve
- TORK water valve
- TORK pneumatic valve
- Threaded valve
- TORK solenoid valve
- Flange valve
- Lever valve
- Electric valve
- TORK gas solenoid valve
- TORK 2-way solenoid valve
- TORK NC solenoid valve
- TORK direct-operated solenoid valve
- Valve with handwheel
- TORK pneumatically-operated valve