WINDING TECHNOLOGY SERIES W2000 HORIZONTAL SLIDING WINDERS Series W2000 horizontal sliding winders for the most challanging tasks The winders series W2000 are horizontal sliding winders. They operate individually moveable winding stations, thus having no free web length at roll change and not producing “indexing scrap” as turret winders do. These winders are preferably used in cast lm lines and extrusion coating lines. They are equipped with different cutting units according to their nal application. Basically 3 models are available: The winder W2000 robotic is used for packaging/ lamination lms like CPP, CPE lms and barrier lms. Due to its strong guillotine cutting knife it is also suitable for laminated structures in the coatings industry. The winder W2000 aerolm is used for the production of hygiene lms, which can be slit inline. Cross cutting is done by means of a twisting knife. Roll diameters up to 1000mm are possible. The winder W2000 stretch wrap features a driven contact roll, an air nozzle start up basket, a guillotine cutting unit, an automated roll handling and a core feeding device. It is optimised for stretch lm, allowing for a short cycle time of 70 seconds and on the other hand offering 3-inch jumbo rolls up to 450mm diameter. Winders series W2000 are known for their solid and versatile design. Depending on the eld of use, they are operated at speeds from a few meters to 750 m/min. For such high line speeds, the winders also include a built-in anti-vibration system. Any vibrations that do arise are deected to the side walls by means of steel anchoring rods, where they are dampened down into polymer concrete. Sensitive web tension control is guaranteed by an ultra-light carbon-bre dancer roller system. Web tension is controlled in the speed control mode making it independent from both motor size and bobbin diameter. A satellite system optimises the angle between the wound bobbin and the incoming web, which in return minimises the trapping of air. Winders series W2000 have large 15-inch TFT colour operating screens. The PLC offers individually adjustable winding taper curves for various products. The error diagnostics tools and a modem connection ensure easy servicing and troubleshooting. AUSTRIA - EUROPE EMAIL: [email protected]

WINDING TECHNOLOGY SERIES W2000 HORIZONTAL SLIDING WINDERS STRETCH WRAP stretch wrap lm / cling lm Thickness range STRETCH WRAP Winding mode Shafted system Winding tension Contact roll pressure Roll start up device electrostatic pinning belt cage 3-inch / (6-inch optional) Max. mechanical roll diameter 3-inch 600mm or smaller, if the total weight exceeds 450kg with part bobbins 600mm or smaller, if the total weight exceeds 450kg with part bobbins Max. mechanical roll diameter on 6-inch 980mm or smaller, if total weight exceeds 1000mm or smaller, if total weight exceeds Cores full width Cross-cutting...